NZ Airport Points (Topo, 1:250k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5969
503
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

A facility where aircraft can take off and land; usually consists of hard-surfaced landing strips, a control tower, hangars and accommodation for passengers and cargo

Data Dictionary for airport_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 50149
Data type Vector point
Feature count 88
Primary key t250_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

25381
3617
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

LINZ Managed Crown Property to Parcel Association

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4752
107
Updated
16 Feb 2020

This dataset was last updated on LINZ Data Service on 16 Feb 2020.

This table is used to associate LINZ Managed Crown Properties to current primary spatial parcels. For some records, there is a one to many relationship between properties and parcels.

This table can be used to link the LINZ Managed Crown Property dataset to parcel layers such as NZ Parcels, NZ Linear Parcels or NZ Primary Parcels

More information on Crown Property can be found under the Crown Property section on the LINZ Website.

Table ID 53450
Data type Table
Row count 14902
Primary key id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Protected Areas to Parcel Association

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6091
85
Updated
16 Feb 2020

This dataset was last updated on LINZ Data Service on 16 Feb 2020.

This table records which current primary parcels are contained with DOC Administered Protected Areas. Most Protected Areas will be made up of more than one primary parcels.

This table can be used to link the DOC Administered Protected Areas dataset to parcel layers such as NZ Parcels, NZ Linear Parcels or NZ Primary Parcels
DOC cannot guarantee the accuracy of the information contained in this table, but rather it represents best endeavours to maintain an accurate record of conservation land.

Table ID 53561
Data type Table
Row count 55038
Primary key id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Protected Areas

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

21406
1915
Updated
16 Feb 2020

This dataset was last updated on LINZ Data Service on 16 Feb 2020.

This Protected Area Layer contains land and marine areas, most of which are administered by the Department of Conservation Te Papa Atawhai (DOC) and are protected by the Conservation, Reserves, National Parks, Marine Mammal and Marine Reserves Acts. All of the areas have been identified spatially. The attributes in this dataset are derived from the National Property and Land Information System (NaPALIS), which is a centralised database for all DOC and LINZ administered land.

The boundaries for most protected areas are derived from the Landonline Primary Parcel(s). In some cases, the boundaries may have been based on unsurveyed parcels defined to varying degrees of accuracy. As such please note that the boundaries are indicative only.

The dataset includes reserves but it is not a complete set. Privately owned reserves are excluded from the dataset as they are not crown land. Also, the dataset does not contain a complete list of reserves “vested” in Local Authorities or “controlled and managed” by other organisations. The dataset is continually being updated however as errors or omissions are discovered and new land transactions are completed.

The Department cannot guarantee the accuracy of the infromation but rather it represents best endeavours to maintain an accurate record of conservation land.

A table of Protected Area associations to Primary Parcels is published in the LDS here.

Layer ID 53564
Data type Vector multipolygon
Feature count 17695
Primary key napalis_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

South Island Pastoral Leases

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23037
1153
Updated
16 Feb 2020

This dataset was last updated on LINZ Data Service on 16 Feb 2020.

This layer includes the current South Island pastoral leases as at the layer's latest revision date. It excludes pastoral leases that have completed Tenure Review, endowment land, special leases, pastoral occupation licences, pastoral vacant land and special leases.
Lease boundaries have been derived from graphical cadastral line work held in LandOnline which in many cases was itself derived from the Lands and Survey Department's hard copy record sheets. The boundaries of many of these original Run Plans, on which these leases were based, were obtained from early Run Plans, circa 1860. As such please note that THE BOUNDARIES ARE INDICATIVE ONLY.
More information on Pastoral Leases can be found under the Crown Pastoral Land section on the LINZ website

Layer ID 51572
Data type Vector multipolygon
Feature count 181
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6344
74
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5963
83
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Arc Chords

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6160
115
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides all authoritative arc survey observations and is targeted at cadastral surveyors.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the Survey Plan.

Layer ID 50778
Data type Vector linestring
Feature count 323573
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Observations (Cadastral)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10545
1800
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides all authoritative bearing and distance survey observations which form part of the cadastral survey dataset

Only observations that have been captured in Landonline are available. This includes observations that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the survey plan.

This dataset only contains right-line survey observations. A small fraction of the total number of survey observations are defined as arcs and are provided via the Survey Arc Chords layer.

Layer ID 51694
Data type Vector linestring
Feature count 44405177
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 81 to 90 of 2172