South Island Pastoral Leases

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24321
1183
Updated
02 Jun 2020

This dataset was last updated on LINZ Data Service on 02 Jun 2020.

This layer includes the current South Island pastoral leases as at the layer's latest revision date. It excludes pastoral leases that have completed Tenure Review, endowment land, special leases, pastoral occupation licences, pastoral vacant land and special leases.
Lease boundaries have been derived from graphical cadastral line work held in LandOnline which in many cases was itself derived from the Lands and Survey Department's hard copy record sheets. The boundaries of many of these original Run Plans, on which these leases were based, were obtained from early Run Plans, circa 1860. As such please note that THE BOUNDARIES ARE INDICATIVE ONLY.
More information on Pastoral Leases can be found under the Crown Pastoral Land section on the LINZ website

Layer ID 51572
Data type Vector multipolygon
Feature count 181
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Trig Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4034
193
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

A structure on top of a hill, usually coloured black and white, used as a physical reference point by surveyors to determine location. The symbol shown on the map includes the elevation and trig identification code for beaconed trig stations.
These topographic trig points are derived from New Zealand geodetic marks data which can also be accessed through the LINZ Data Service: NZ Geodetic Marks and NZ Geodetic Vertical Marks.

Data Dictionary for trig_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 103476
Data type Vector point
Feature count 5791
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Electronic Navigational Chart (ENC) Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7074
203
Updated
01 Jun 2020

This dataset was last updated on LINZ Data Service on 01 Jun 2020.

This dataset provides an index to the Electronic Navigational Charts (ENC) available through the LINZ Data Service showing extent and ENC attributes.

The ENC index is compiled from the S-57 Object Class “Nautical publication information” which is used to relate additional nautical information or publications to the data. The attributes are populated by Land Information New Zealand’s (LINZ) production database.

S-57 is a standard used to exchange digital hydrographic data between hydrographic offices and to distribute this data to users.
This dataset was compiled for the use in the scale ranges 1:1,000 to 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in ENCs, published and maintained by the New Zealand Hydrographic Authority at LINZ. Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This document provides detailed metadata for the NZ Electronic Navigational Chart (ENC) and Paper Nautical Chart indexes available on the LINZ Data Service: data.linz.govt.nz/document/21520-enc-and-paper-cha...

Layer ID 50813
Data type Vector multipolygon
Feature count 311
Primary key enc_no
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6999
76
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 4381
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6696
87
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Arc Chords

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6864
116
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides all authoritative arc survey observations and is targeted at cadastral surveyors.

Only observations that have been captured in Landonline are available. This includes vectors that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the Survey Plan.

Layer ID 50778
Data type Vector linestring
Feature count 325581
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Observations (Cadastral)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11427
1887
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides all authoritative bearing and distance survey observations which form part of the cadastral survey dataset

Only observations that have been captured in Landonline are available. This includes observations that were re-captured in the Survey Capture Areas from survey plans lodged prior to Landonline and all survey observations since.

Individual cadastral surveys will commonly re-measure or re-use cadastral lines. Often they will be the same, however as the accuracy capability has increased over time, differences between 'old' and 'new' observations are more likely. Thus all survey observations include the reference to the survey plan.

This dataset only contains right-line survey observations. A small fraction of the total number of survey observations are defined as arcs and are provided via the Survey Arc Chords layer.

Layer ID 51694
Data type Vector linestring
Feature count 44884795
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cadastral Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8754
218
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides the extents of influence that the work to integrate survey information has on the surrounding Cadastre.

All cadastral surveys must be integrated into the Cadastre. As part of this process the new information 'upgrades' the existing information. This is controlled by a mathematical adjustment process using a Least Squares methodology.

The adjustment/Integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extend of the change largely depends upon the size of the new survey, the difference in accuracy between new and old data and the number of linkages to other Surveys.

In general, where the underlying surveys are older or in a rural location the greater the extent of the adjustment.

Layer ID 50790
Data type Vector polygon
Feature count 253346
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Survey Non-Boundary Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11993
1688
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides survey mark information for marks that are not part of a parcel

A non-boundary mark is any survey mark that is not on a boundary point. The points in this dataset represent physical survey monuments usually placed for cadastral requirements. The data set also includes geodetic marks. Non-boundary marks now enter the Landonline system predominately as part of a cadastral survey dataset (plan) and occasionally via the geodetic processes. For Cadastral marks (i.e.the majority) its name consists of a mark type and number (and is unique to that survey), followed by the ‘plan’ number e.g. IS I DP 3456; IS II DP3456.

Note:
Non-boundary marks used to connect cadastral surveys to the geodetic network are those of 6th order (or better) and this subset is available as the NZ Cadastral Survey Network Marks layer.

This dataset extends the Landonline stored data by including the network accuracy which is based upon its assigned Landonline order - refer LINZS25006 (www.linz.govt.nz/about-linz/news-publications-and-...).

The accuracy provided relates to the accuracy of coordinates of the mark and has little relevance to the accuracy of the boundary in relation to other boundaries. For example, if the coordinates of the mark were used to locate it, a user would expect to find the existing mark within the accuracy (distance) stated.

Layer ID 50776
Data type Vector point
Feature count 2555879 (incl. 34 with empty or null geometries)
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cadastral Survey Network Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14372
2026
Updated
30 May 2020

This dataset was last updated on LINZ Data Service on 30 May 2020.

This layer provides all marks and associated information that have an order of 6 or better.
Cadastral surveys are required to connect to these marks if they are within a specified distance.

A cadastral survey network mark is a node which is (or was) occupied by a physical survey monument that meets accuracy standards suitable for cadastral requirements. i.e. Cadastral Survey Network Marks have a NZGD2000 horizontal coordinate order of 6 or better. The complete definition for these mark orders is defined by the following Standard.
"www.linz.govt.nz/survey-titles/cadastral-surveying..."

When a new cadastral survey network mark is named as part of a cadastral survey dataset (plan) its name consists of a mark type and number that is unique to that survey, followed by the plan number e.g. IS I DP 3456; IS II DP3456.

Layer ID 50777
Data type Vector point
Feature count 975627
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 101 to 110 of 2193