Browse Data

A structure on top of a hill, usually coloured black and white, used as a physical reference point by surveyors to determine location. The symbol shown on the map includes the elevation and trig identification code for beaconed trig stations.

Data Dictionary for trig_pnt: The NZ Topographic Data Dictionary is yet to be updated for trig points.

These topographic trig points are derived from New Zealand geodetic marks data which can also be accessed through the LINZ Data Service: NZ Geodetic Marks (data.linz.govt.nz/layer/50787/) and NZ Geodetic Vertical Marks (data.linz.govt.nz/layer/50784/)

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A structure in shallow water for fishing purposes which can be an obstruction to ships in general. The position of these structures may vary frequently over time.

S-57 Object Class: Fishing facility

S-57 Acronym: FSHFAC

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A permanently moored ship.

S-57 Object Class: Hulk

S-57 Acronym: HULKES

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the Index Tiles for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This dataset provides building outlines within mainland New Zealand extracted from multiple years of aerial imagery, allowing you to see change over time, or restrict the dataset to building outlines that match a specific aerial imagery source.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building roof outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset contains all building outlines which have been extracted from multiple years of aerial imagery available in each region of the country, including the most recent imagery. This dataset includes the dates for which each building existed in the aerial imagery.

Coverage areas include Northland, Auckland, Waikato, Hawke’s Bay, Manawatu-Whanganui, Wellington, Tasman, West Coast, Marlborough, Canterbury, Southland and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines Lifecycle – stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline. Use this in conjunction with the NZ Building Outlines (All Sources) dataset.

NZ Building Outlines - provides current building outlines only, derived from the latest LINZ aerial imagery.

This table provides the relationships between building outlines within mainland New Zealand when buildings are split or merged.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Data vintage

This dataset does not include building outline geometry, but provides the linkages between building_id's from different aerial imagery sources in the NZ Building Outlines (All Sources) dataset when building outlines change from single outlines split into multiple outlines, and from multiple outlines merged as single outlines.

This dataset will be updated with changes in building_id relationships as new aerial imagery becomes available.
Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines (All Sources) - directly related to this dataset, it contains all combinations of building outlines from multiple years of imagery that have existed since the beginning of this dataset.

NZ Building Outlines - provides current building outlines only derived from the latest LINZ aerial imagery.

This dataset provides current outlines of buildings within mainland New Zealand captured from the latest aerial imagery.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset shows the most recent set of building outlines extracted from the LINZ aerial imagery available on the LINZ Data Service.

Current coverage includes areas in Northland, Auckland, Waikato, Hawke’s Bay, Manawatu-Whanganui, Wellington, Tasman, West Coast, Marlborough, Canterbury, Southland and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Since aerial imagery is flown only every few years in each region of the country, building outlines only reflect those buildings observed at the date of this aerial imagery capture, and may not reflect buildings constructed after this time period.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines (All Sources) - contains all combinations of building outlines from multiple years of imagery that have existed since the beginning of this dataset, and the dates when each building outline existed in the associated aerial imagery.

NZ Building Outlines Lifecycle - is related to the dataset above and stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline.

Orthophotography over Tauranga City.
The aerial photography was captured on 21 March 2017.

Imagery was captured for the ‘Tauranga City Council’ by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:
•788 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:1,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 10cm pixel resolution (0.010m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ± 0.20m @ 90% confidence level.

Index tiles for this dataset are available as layer Tauranga 0.1m Urban Aerial Photos Index Tiles (2017)