Elevation Data - Page 4

This layer contains the DEM for LiDAR data from the Timaru river areas captured in 2014.
The DSM is available as layer Canterbury - Timaru Rivers LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Timaru Rivers LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys in July and August 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Geraldine and Temuka township areas and the lower Rangitata, Orari, and Opihi river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is > 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Timaru river areas captured in 2014.
The DEM is available as layer Canterbury - Timaru Rivers LiDAR 1m DEM (2014).
The index tiles are available as layer Canterbury - Timaru Rivers LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys in July and August 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Geraldine and Temuka township areas and the lower Rangitata, Orari, and Opihi river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is > 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Timaru river areas captured in 2014.
The DEM is available as layer Canterbury - Timaru Rivers LiDAR 1m DEM (2014).
The DSM is available as layer Canterbury - Timaru Rivers LiDAR 1m DSM (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys in July and August 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Geraldine and Temuka township areas and the lower Rangitata, Orari, and Opihi river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is > 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Nelson and Tasman region captured between 2008 and 2015. The Digital Surface Model has not been included because of the varying timeframes of the base datasets. There are also small gaps between most datasets.

• The index tiles are available as layer Nelson and Tasman LiDAR Index Tiles (2008-2015).

• The LAS point clouds and vendor project reports are available from LINZ on request (imagery@linz.govt.nz).

Lidar was captured for Nelson City Council and Tasman District Council by New Zealand Aerial Mapping, Aerial Surveys and AAM New Zealand between May 2008 and December 2015. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Nelson and Tasman region captured between 2008 and 2015. The Digital Surface Model has not been included because of the varying timeframes of the base datasets. There are also small gaps between most datasets.

• The DEM is available as layer Nelson and Tasman LiDAR 1m DEM (2008-2015).

• The LAS point clouds and vendor project reports are available from LINZ on request (imagery@linz.govt.nz).

Lidar was captured for Nelson City Council and Tasman District Council by New Zealand Aerial Mapping, Aerial Surveys and AAM New Zealand between May 2008 and December 2015. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Vertical datum is NZVD2016.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50