Elevation Data - Page 5

This layer contains the DSM for LiDAR data from the Amberley area captured in 2012.
The DEM is available as layer Canterbury - Amberley LiDAR 1m DEM (2012).
The index tiles are available as layer Canterbury - Amberley LiDAR Index Tiles (2012).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 10 and 17 July 2012. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Amberley and Waipara township areas and adjacent coastal strips and river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is >1 pulse/square metre.

Vertical accuracy specification is +/- 0.20m (95%).
Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Waikato west coast and Hauraki Plains captured in 2015.
The DSM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DSM (2015).
The index tiles are available as layer Waikato - West Coast and Hauraki Plains LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waikato Regional Council by Aerial Surveys in February and March 2015. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Point density is 2 points/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DEM is available as layer Tasman - Golden Bay LiDAR 1m DEM (2017).

• The index tiles are available as layer Tasman - Golden Bay LiDAR Index Tiles (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DEM is available as layer Tasman - Richmond and Motueka LiDAR 1m DEM (2015).

• The index tiles are available as layer Tasman - Richmond and Motueka LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specfication is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%)

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Queenstown Area of the Otago Region captured in 2016.

• The DEM is available as layer Otago - Queenstown LiDAR 1m DEM (2016).

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Otago Region captured in 2016.

• The DEM is available as layer Otago LiDAR 1m DEM (2016).

• The index tiles are available as layer Otago LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Refer to individual survey reports for accuracy statistics.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.