Elevation Data

This layer contains the index tiles for LiDAR data in the West Coast Region of Westport and surrounding area captured in June 2020.

• The DEM is available as layer West Coast - Westport LiDAR 1m DEM (2020).

• The DSM is available as layer West Coast - Westport LiDAR 1m DSM (2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for West Coast Regional Council by Aerial Surveys on 22 and 30 June 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Co-funding was provided by the Ministry of Business, Innovation and Employment Provincial Development Unit.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the West Coast Region of Westport and surrounding area captured in June 2020.

• The DEM is available as layer West Coast - Westport LiDAR 1m DEM (2020).

• The index tiles are available as layer West Coast - Westport LiDAR Index Tiles (2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for West Coast Regional Council by Aerial Surveys on 22 and 30 June 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Co-funding was provided by the Ministry of Business, Innovation and Employment Provincial Development Unit.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the West Coast Region of Westport and surrounding area captured in June 2020.

• The DSM is available as layer West Coast - Westport LiDAR 1m DSM (2020).

• The index tiles are available as layer West Coast - Westport LiDAR Index Tiles (2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for West Coast Regional Council by Aerial Surveys on 22 and 30 June 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand. Co-funding was provided by the Ministry of Business, Innovation and Employment Provincial Development Unit.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Wellington region captured between 2013 and 2014.
The DEM is available as layer Wellington LiDAR 1m DEM (2013-2014).
The DSM is available as layer Wellington LiDAR 1m DSM (2013-2014).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys between 2013 and 2014. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data from the Wellington region captured between 2013 and 2014.
The DEM is available as layer Wellington LiDAR 1m DEM (2013-2014).
The index tiles are available as layer Wellington LiDAR Index Tiles (2013-2014).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys between 2013 and 2014. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the DEM for LiDAR data from the Wellington region captured between 2013 and 2014. Note that this DEM is based on automated point cloud classification and contains some residual remnants of surface features.

The DSM is available as layer Wellington LiDAR 1m DSM (2013-2014).
The index tiles are available as layer Wellington LiDAR Index Tiles (2013-2014).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys between 2013 and 2014. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the Index Tiles for LiDAR data in the Wellington Region including Wellington City as well as the surrounding area captured between 2019 and 2020.

• The DEM is available as layer Wellington City LiDAR 1m DEM (2019-2020).

• The DSM is available as layer Wellington City LiDAR 1m DSM (2019-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Wellington City Council by Aerial Surveys from 20 March 2019 to 14 March 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 16 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Wellington Region including Wellington City as well as the surrounding area captured between 2019 and 2020.

• The DEM is available as layer Wellington City LiDAR 1m DEM (2019-2020).

• The index tiles are available as layer Wellington City LiDAR Index Tiles (2019-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Wellington City Council by Aerial Surveys from 20 March 2019 to 14 March 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 16 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Wellington Region including Wellington City as well as the surrounding area captured between 2019 and 2020.

• The DSM is available as layer Wellington City LiDAR 1m DSM (2019-2020).

• The index tiles are available as layer Wellington City LiDAR Index Tiles (2019-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Wellington City Council by Aerial Surveys from 20 March 2019 to 14 March 2020. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 16 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Waikato west coast and Hauraki Plains captured in 2015.
The DEM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DEM (2015).
The DSM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waikato Regional Council by Aerial Surveys in February and March 2015. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Point density is 2 points/square metre.

Vertical datum is NZVD2016.