Oceania Elevation Data - Page 5

This layer contains the DSM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DSM is available as layer Marlborough LiDAR 1m DSM (2018).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2018).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2018).

• The DSM is available as layer Marlborough LiDAR 1m DSM (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Nelson and Tasman region captured between 2008 and 2015. The Digital Surface Model has not been included because of the varying timeframes of the base datasets. There are also small gaps between most datasets.

• The index tiles are available as layer Nelson and Tasman LiDAR Index Tiles (2008-2015).

• The LAS point clouds and vendor project reports are available from LINZ on request (imagery@linz.govt.nz).

Lidar was captured for Nelson City Council and Tasman District Council by New Zealand Aerial Mapping, Aerial Surveys and AAM New Zealand between May 2008 and December 2015. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Nelson and Tasman region captured between 2008 and 2015. The Digital Surface Model has not been included because of the varying timeframes of the base datasets. There are also small gaps between most datasets.

• The DEM is available as layer Nelson and Tasman LiDAR 1m DEM (2008-2015).

• The LAS point clouds and vendor project reports are available from LINZ on request (imagery@linz.govt.nz).

Lidar was captured for Nelson City Council and Tasman District Council by New Zealand Aerial Mapping, Aerial Surveys and AAM New Zealand between May 2008 and December 2015. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Vertical datum is NZVD2016.