NZ Coastlines and Islands Polygons (Topo 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12224
3133
Updated
11 Dec 2018

This dataset was last updated on LINZ Data Service on 11 Dec 2018.

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

  1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
  2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
  3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.
  4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.

For more detailed description of each layer refer to the layer urls above.

Layer ID 51153
Data type Vector multipolygon
Feature count 9135
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Historic Aerial Photos, Photo Footprints (1936-2005)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

28194
1417
Updated
17 Oct 2018

This dataset was last updated on LINZ Data Service on 17 Oct 2018.

This layer has been provided to enable potential users to identify the coverage of photography for Mainland NZ flown on behalf of the Crown between 1936 and 2005. It shows the extent of each photograph taken from the CROWN archive.

Historic Aerial Photos, Survey Footprints, CROWN (1936-2005) shows the extent of each CROWN survey undertaken.

Some photos from the NZAM archive may also appear in this layer. The Historic Aerial Photos, Survey Footprints, NZAM (1939-2008) shows the extent of each NZAM survey undertaken

See The Crown historic aerial photo archive scanning project for information about the scanning project.

How to Access Photos:
The photos are not downloadable from the LINZ Data Service.

Scanned photos from the partner regions may be viewed and downloaded from Retrolens.

The Crown Aerial Film Negative Collection is managed for LINZ by WSP Opus International. For photos not scanned yet, you can order images from the Collection from Opus NZ in a number of formats, including:

  • contact prints
  • enlargements
  • digital files
  • precision scans for photogrammetric production
  • orthophotos

You will need to tell Opus International the survey, run and photo number (values in the ‘SURVEY’ 'RUN' and 'PHOTO_NO' attributes) covering your area of interest.
Opus NZ will be able to provide information about the cost of providing images in the various formats. Contact them at: photosales@opus.co.nz or 0800 680 690

There are also a large number of images which previously belonged to New Zealand Aerial Mapping and which are now are available for public use. Historic Aerial Photos, Survey Footprints, NZAM (1939-2008) shows the extent of each survey undertaken. You can order these photos by contacting Opus NZ.

Layer ID 51002
Data type Vector polygon
Feature count 510247 (incl. 77929 with empty or null geometries)
Primary key sufi
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14092
2545
Updated
29 Sep 2018

This dataset was last updated on LINZ Data Service on 29 Sep 2018.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

107733
24686
Updated
01 Oct 2018

This dataset was last updated on LINZ Data Service on 01 Oct 2018.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50767
Data type Image/Raster
Resolution 4.233m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wreck Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4858
459
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle

Data Dictionary for wreck_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50379
Data type Vector point
Feature count 51
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Windmill Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4588
574
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

A mill or other machine that runs on the energy generated by a wheel of adjustable blades or flats rotated by the wind

Data Dictionary for windmill_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50378
Data type Vector point
Feature count 808
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wharf Edges (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4757
473
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.

Data Dictionary for wharf_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50377
Data type Vector linestring
Feature count 120
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wharf Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4521
529
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.

Data Dictionary for wharf_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50376
Data type Vector linestring
Feature count 1738
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Well Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4907
395
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

A pit or hole dug or bored into the earth

Data Dictionary for well_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50375
Data type Vector point
Feature count 106
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Weir Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4483
390
Updated
28 Sep 2018

This dataset was last updated on LINZ Data Service on 28 Sep 2018.

An artificial barrier placed in an open channel and over which the water flows

Data Dictionary for weir_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50374
Data type Vector linestring
Feature count 48
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 708