NZ Snares Island/Tini Heke Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2394
9
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Snares Islands / Tini Heke data and map, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52399
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1921
8
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Kermadec Island Group data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52398
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2313
12
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52397
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bounty Islands Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1947
7
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Bounty Island data and map, although captured and presented at 1:25,000 scale is, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52396
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1133
30
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52395
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Antipodes Island Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1932
11
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Antipodes Island Group data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52394
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Rock Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2367
7
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

An isolated rock or rock formation between high and low tides.

Data Dictionary for rock_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52390
Data type Vector point
Feature count 4
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Snares Island/Tini Heke Building Points (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1935
14
Added
21 May 2014

This dataset was first added to LINZ Data Service on 21 May 2014.

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 51974
Data type Vector point
Feature count 2
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Wreck Points (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1618
32
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle

Data Dictionary for wreck_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50923
Data type Vector point
Feature count 2
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Tree Points (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1707
26
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A woody perennial plant, having a self-supporting main stem or trunk.

Data Dictionary for tree_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50922
Data type Vector point
Feature count 23
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 105