NZ Snares Island/Tini Heke Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5991
13
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Snares Islands / Tini Heke data and map, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52399
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3781
9
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Kermadec Island Group data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52398
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5930
18
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52397
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bounty Islands Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3791
10
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Bounty Island data and map, although captured and presented at 1:25,000 scale is, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52396
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1151
46
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52395
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Antipodes Island Terrain Relief (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3775
13
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

The Antipodes Island Group data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52394
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Height Points (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3423
39
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50907
Data type Vector point
Feature count 91
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Contours (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3228
60
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50904
Data type Vector linestring
Feature count 136
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Height Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5317
48
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground

Data Dictionary for height_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50930
Data type Vector point
Feature count 64
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Cliff Edges (Topo, 1:25k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3461
32
Updated
04 Oct 2012

This dataset was last updated on LINZ Data Service on 04 Oct 2012.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50903
Data type Vector linestring
Feature count 68
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 25