AIMS: Addressable Object Lifecycle Stage

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6837
1005
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Addressable Object Lifecycle Stage and is part of the set of comprehensive AIMS Address Tables.

The Addressable Object Lifecycle Stage look-up table is used by the following tables; AIMS: Addressable Object.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Table ID 53335
Data type Table
Row count 3
Primary key addressable_object_lifecycle_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads: Capture Method

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3989
746
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Capture Method and is part of the set of NZ Roads tables.

The Capture Method look-up table is used by the following tables; NZ Roads: Road Section Geometry.

The NZ Roads dataset includes eight data tables and eleven lookup tables. The dataset has been sourced from LINZ’s NZ Roads database, a database for the management of national roads, including those managed for addressing purposes. This set of normalised tables replaces the Landonline: Road Centre Line layer and the Landonline: Road Name and Landonline: Road Name Association tables currently published on LDS.

These centrelines are required to indicate the presence of an authoritative road name. Named centrelines are not intended to represent the exact location of a road formation. Named centrelines do not indicate the presence of legal access.

For a simplified version of the data contained within these tables see NZ Roads (Addressing), which aggregates geometries based on road name, and NZ Roads Subsections (Addressing), which holds the individual geometries.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Table ID 53384
Data type Table
Row count 13
Primary key capture_method_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads: Road Type

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5094
840
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Road Type and is part of the set of NZ Roads tables.

The Road Type look-up table is used by the following tables; NZ Roads: Road Section Geometry.

The NZ Roads dataset includes eight data tables and eleven lookup tables. The dataset has been sourced from LINZ’s NZ Roads database, a database for the management of national roads, including those managed for addressing purposes. This set of normalised tables replaces the Landonline: Road Centre Line layer and the Landonline: Road Name and Landonline: Road Name Association tables currently published on LDS.

These centrelines are required to indicate the presence of an authoritative road name. Named centrelines are not intended to represent the exact location of a road formation. Named centrelines do not indicate the presence of legal access.

For a simplified version of the data contained within these tables see NZ Roads (Addressing), which aggregates geometries based on road name, and NZ Roads Subsections (Addressing), which holds the individual geometries.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Table ID 53381
Data type Table
Row count 4
Primary key road_type_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

AIMS: Address Lifecycle Stage

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6871
1005
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Address Lifecycle Stage and is part of the set of comprehensive AIMS Address Tables.

The Address Lifecycle Stage look-up table is used by the following tables; AIMS: Address.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Table ID 53329
Data type Table
Row count 3
Primary key address_lifecycle_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Roads: Road Name Class

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4315
778
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Road Name Class and is part of the set of NZ Roads tables.

The Road Name Class look-up table is used by the following tables; NZ Roads: Road Name.

The NZ Roads dataset includes eight data tables and eleven lookup tables. The dataset has been sourced from LINZ’s NZ Roads database, a database for the management of national roads, including those managed for addressing purposes. This set of normalised tables replaces the Landonline: Road Centre Line layer and the Landonline: Road Name and Landonline: Road Name Association tables currently published on LDS.

These centrelines are required to indicate the presence of an authoritative road name. Named centrelines are not intended to represent the exact location of a road formation. Named centrelines do not indicate the presence of legal access.

For a simplified version of the data contained within these tables see NZ Roads (Addressing), which aggregates geometries based on road name, and NZ Roads Subsections (Addressing), which holds the individual geometries.

Please refer to the NZ Roads Data Dictionary for detailed metadata and information about this layer.

Table ID 53373
Data type Table
Row count 5
Primary key road_name_class_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

AIMS: Address Component Type

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7263
1023
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: This is the look-up table for Address Component Type and is part of the set of comprehensive AIMS Address Tables.

The Address Component Type look-up table is used by the following tables; AIMS: Address Component.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Table ID 53327
Data type Table
Row count 21
Primary key address_component_type_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

AIMS: Address Position

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12354
1402
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read: The AIMS: Address Position table is part of the set of comprehensive AIMS Address tables.

The Address Position table contains the point location of an address. An address can have multiple point positions. The Addresspositiontype describes the position E.g. centroid, set back from road. In the first instance the Landonline address position will be used the positioning of this is 'unknown'. Additional Address Position data may be captured over time.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Layer ID 53355
Data type Vector point
Feature count 2073046
Primary key address_position_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Street Address

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

56354
9337
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please read:This layer provides all allocated addresses as advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.


Local Government Act 1974
319B Allocation of property numbers
(1) For electoral, postal, and other purposes the council may allocate a number to any area of land or building or part of a building within its district and may change the number allocated to any such area of land or building.
(2) The council shall comply with any request from a Chief Surveyor to allocate a number to or change the number of any area of land or building or part of a building in its district.
(3) The principal administrative officer shall advise the Chief Surveyor of the land district in which the land or building is situated of the numbers allocated under subsection (1) or subsection (2).


This dataset contains the core components of an address to support simple searching or use of this layer to provide context and is a replacement for the NZ Street Address (Electoral) dataset. This dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes.

The existing address and road datasets will be available for 6 months after AIMS go-live to allow users further time to transition.This version will be replacing NZ Street Address (Electoral) dataset.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

For a comprehensive group of address tables see AIMS: Street Address.

Layer ID 53353
Data type Vector point
Feature count 2058822
Primary key address_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

AIMS: Address Component

LINZ / Addressing
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8642
1730
Updated
13 Oct 2019

This dataset was last updated on LINZ Data Service on 13 Oct 2019.

Please note: We have a known issue, where 'unit_value' is not represented in the address_component_value field for a number of address records in the AIMS: Address Component table. Where it is not populated, it will present as duplicated addresses. LINZ is working to resolve this issue. Sorry for any inconvenience this may cause.

Please read: The AIMS: Address Component data table is part of the set of comprehensive AIMS Address tables.

The Address Component table contains core information relating to a street address such as Street Number or Road Name and is stored in the address_component_value field of the Address Component table. The address_component_type describes the type of component e.g. Address number, road name, town/city. This table also includes component order and group to allow for address number elements and road name elements to be grouped together.

This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.

The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.

For a simplified version of the data contained within these tables see NZ Street Address.

Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.

Table ID 53354
Data type Table
Row count 10612096
Primary key address_component_id
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3931
71
Updated
12 Oct 2019

This dataset was last updated on LINZ Data Service on 12 Oct 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 2130