Antarctic Geodetic Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3955
69
Updated
12 Oct 2019

This dataset was last updated on LINZ Data Service on 12 Oct 2019.

This dataset provides information about the position, position accuracy, mark name, mark type, condition and unique four letter code for geodetic marks in terms of New Zealand's official geodetic datum for the Ross Dependency.

This dataset only includes marks that are within Antarctica. These positions have been generated using geodetic observations such as precise differential GPS or electronic distance and theodolite angles measurements. The positions are either 2D or 3D depending of the availability of this measurement data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

Geodetic marks with a coordinate order of 5 or less have been positioned in terms of Ross Sea Region Geodetic Datum 2000 (RSRGD2000) using precise differential GPS techniques. Marks with order 6 have been positioned in terms of RSRGD2000 using precise horizontal angles and distance measurements. Lower order marks (order 7 and greater) are derived from lower accuracy measurement techniques or historical datum transformations, and may be significantly less accurate.

The accuracy of RSRGD2000 coordinates is described by a series of 'orders' classifications. Positions in terms of RSRGD2000 are described by three-dimensional coordinates (latitude, longitude, ellipsoidal height). The accuracy of a survey mark is indicated by its order. Orders are classifications based on the quality of the coordinate in relation to the datum and in relation to other surrounding marks. For more information see www.linz.govt.nz/geodetic/datums-projections-heigh...

Note that the accuracy applies at the time the mark was last surveyed. Refer to the web geodetic database for historical information about mark coordinates.

Note also that the existence of a mark in this dataset does not imply that there is currently a physical mark in the ground - the dataset includes destroyed or lost historical marks. The geodetic database provides more information on the mark status, valid at last time it was visited by LINZ.

Layer ID 50789
Data type Vector point
Feature count 468
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Geodetic Vertical Marks

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3617
46
Updated
12 Oct 2019

This dataset was last updated on LINZ Data Service on 12 Oct 2019.

This dataset provides information about the position, height, height datum, height accuracy, mark name, mark type, condition and unique four letter identifier for geodetic marks that have an authoritative height in terms of a vertical datum.
Heights are in datums defined at www.linz.govt.nz/geodetic/datums-projections-heigh....

All marks will have positions in terms of New Zealand’s official geodetic datum for Antarctica, Ross Sea Region Geodetic Datum 2000 (RSRGD2000). The horizontal positions of marks are provided for approximate location purposes only.

This dataset only includes marks that are within the Antarctic region. The height data for these marks have been generated primarily using precise vertical angle and slope distance measurements from datum tide gauges. Some have been generated from levelling data.

The source data is from Land Information New Zealand's (LINZ) Landonline system where it is used by Land Surveyors. This dataset is updated daily to reflect changes made in the Landonline.

Accuracy

The accuracy of normal-orthometric heights are described by height orders.

For more information see www.linz.govt.nz/geodetic/datums-projections-heigh....

Note the accuracy applies at the time the mark was last surveyed - see the geodetic database for historical information about height coordinates.

Layer ID 50788
Data type Vector point
Feature count 279
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Ross Dependency Descriptive Texts (ANT, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3354
62
Updated
15 Apr 2019

This dataset was last updated on LINZ Data Service on 15 Apr 2019.

Descriptive text; object used to hold text.

Data Dictionary for descriptive_text: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Ant50 map series. This is the topographic mapping carried out at 1:50,000 scale by LINZ within the Ross Dependency, Antarctica.

Layer ID 51188
Data type Vector point
Feature count 105
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Ross Dependency Geographic Names (ANT, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2982
97
Updated
15 Apr 2019

This dataset was last updated on LINZ Data Service on 15 Apr 2019.

Geographic name holds the proper noun of certain objects within the Topo databases. Geographic_name does not apply to roads, railway lines, or descriptive text - eg 'Brunner Mine' would be a Geographic_name but 'mine disused' is held in the descriptive_text feature

Data Dictionary for geographic_name: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Ant50 map series. This is the topographic mapping carried out at 1:50,000 scale by LINZ within the Ross Dependency, Antarctica.

Layer ID 51167
Data type Vector point
Feature count 2119
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Bathymetric Surface Model Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1649
5
Updated
26 Mar 2019

This dataset was last updated on LINZ Data Service on 26 Mar 2019.

This index enables you to identify freely available digital bathymetric surface models owned by LINZ. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from publically funded single- or multi-beam data collected in the Southern Ocean/Ross Sea since 2004. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be provided to you on request.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

Layer ID 95588
Data type Vector multipolygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Building, single points (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3478
20
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

A relatively permanent structure, roofed and usually walled. It is designed for some particular use which it may be important to indicate.

S-57 Object Class: Building, single

S-57 Acronym: BUISGL

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 92243
Data type Vector point
Feature count 20
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ice area polygon (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3226
34
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

An area of ice over land or water.

S-57 Object Class: Ice area

S-57 Acronym: ICEARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51635
Data type Vector multipolygon
Feature count 111
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Unsurveyed area polygon (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3565
36
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

An area for which no bathymetric survey information is available.

S-57 Object Class: Unsurveyed area

S-57 Acronym: UNSARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51610
Data type Vector multipolygon
Feature count 6
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Unsurveyed area polygon (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3353
30
Updated
18 Dec 2018

This dataset was last updated on LINZ Data Service on 18 Dec 2018.

An area for which no bathymetric survey information is available.

S-57 Object Class: Unsurveyed area

S-57 Acronym: UNSARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51602
Data type Vector multipolygon
Feature count 1
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Ice area polygon (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2027
20
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

An area of ice over land or water.

S-57 Object Class: Ice area

S-57 Acronym: ICEARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51598
Data type Vector multipolygon
Feature count 66
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 68