Oceania Data - Page 13

Polygon for each Topo50 map sheet holding extents of each sheet, it's sheet code, name, edition, and revision statement. This is the same information that is printed on each Topo50 map

Data Dictionary for linz_map_sheet: docs.topo.linz.govt.nz/data-dictionary/tdd-class-l...

Although captured and presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Index Tiles ONLY, for actual orthophotos see layer Tasman 0.4m Rural Aerial Photos (2012 - 2013)

Orthophotography for the Tasman region taken in the flying season (summer period) of 2012-2013. Covering the area from Collingwood, Takaka, Motueka, Mapua to south-east of Nelson City.

Imagery was captured for the ‘Tasman District Council’ by NZ Aerial Mapping Ltd, 208 Warren Street, PO Box 6, Hastings 4156, New Zealand

Data has subsequently been provided to LINZ and this comprises:
• 316 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:5,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 40cm pixel resolution (0.4m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-3.0m (@ 90% confidence).

Raster chart image of: NZ 5217 Plans in Whangarei Harbour

This data was compiled for the use at the following scale: 1:8000

File reference: NZ521703.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

For Tokelau the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Contact local authorities for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special areas.

A portion of land on which refuse, solid or semi-solid waste, is dumped and then covered with earth.

Data Dictionary for landfill_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-l...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Index Tiles ONLY, for actual orthophotos see layer Whanganui 0.075m Urban Aerial Photos (2017)

Orthophotography in the Whanganui District taken in the flying seasons (summer period) 2017-2018.

Imagery was captured for Whanganui District Council by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•764 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 7.5cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 68% confidence level.