Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 26 Feb 2021.
Please read: The AIMS: Address Position table is part of the set of comprehensive AIMS Address tables.
The Address Position table contains the point location of an address. An address can have multiple point positions. The Addresspositiontype describes the position E.g. centroid, set back from road. In the first instance the Landonline address position will be used the positioning of this is 'unknown'. Additional Address Position data may be captured over time.
The comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.
This layer contains information advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.
For a simplified version of the data contained within these tables see NZ Street Address.
Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.
Layer ID | 53355 |
---|---|
Data type | Vector point | Feature count | 2117221 |
Primary key | address_position_id |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Please read: This comprehensive address dataset provides all allocated addresses as advised to LINZ by Territorial Authorities (TAs). Under the Local Government Act 1974 (section 319) it is the responsibility of the TAs to advise LINZ (the Surveyor General) of all allocated addresses in their district.*
Local Government Act 1974
319B Allocation of property numbers
(1) For electoral, postal, and other purposes the council may allocate a number to any area of land or building or part of a building within its district and may change the number allocated to any such area of land or building.
(2) The council shall comply with any request from a Chief Surveyor to allocate a number to or change the number of any area of land or building or part of a building in its district.
(3) The principal administrative officer shall advise the Chief Surveyor of the land district in which the land or building is situated of the numbers allocated under subsection (1) or subsection (2).
This comprehensive address dataset includes eight data tables and nine lookup tables. The dataset has been sourced from LINZ’s Address Information Management System (AIMS), a centralised database for the management of national addresses, including for electoral purposes. This set of normalised tables replaces the single Landonline: Street Address layer currently published on LDS.
The existing address and road datasets will be available for 6 months after AIMS go-live to allow users further time to transition.This version will be replacing Landonline: Street Address dataset.
For a simplified version of the data contained within these tables see NZ Street Address.
Please refer to the Street Address Data Dictionary for detailed metadata and information about this layer.
Added | 08 Dec 2015 |
---|
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
An area containing at least one runway, used for landing, take-off, and movement of aircraft.
S-57 Object Class: Airport/airfield
S-57 Acronym: AIRARE
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50638 |
---|---|
Data type | Vector multipoint | Feature count | 1 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 29 Jul 2020.
An area containing at least one runway, used for landing, take-off, and movement of aircraft.
S-57 Object Class: Airport/airfield
S-57 Acronym: AIRARE
This data was compiled for the use in the scale range 1:90,000 to 1:350,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50056 |
---|---|
Data type | Vector multipoint | Feature count | 10 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
An area containing at least one runway, used for landing, take-off, and movement of aircraft.
-57 Object Class: Airport/airfield
S-57 Acronym: AIRARE
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50525 |
---|---|
Data type | Vector multipolygon | Feature count | 96 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
An area containing at least one runway, used for landing, take-off, and movement of aircraft.
S-57 Object Class: Airport/airfield
S-57 Acronym: AIRARE
This data was compiled for the use in the scale range 1:90,000 to 1:350,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50057 |
---|---|
Data type | Vector multipolygon | Feature count | 21 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
An area containing at least one runway, used for landing, take-off, and movement of aircraft.
S-57 Object Class: Airport/airfield
S-57 Acronym: AIRARE
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50639 |
---|---|
Data type | Vector multipolygon | Feature count | 34 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
A designated area of water where a single vessel, sea plane, etc... may anchor.
S-57 Object Class: Anchor berth
S-57 Acronym: ACHBRT
This data was compiled for the use in the scale range 1:22,000 to 1:90,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50522 |
---|---|
Data type | Vector multipoint | Feature count | 35 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
A designated area of water where a single vessel, sea plane, etc... may anchor.
S-57 Object Class: Anchor berth
S-57 Acronym: ACHBRT
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50636 |
---|---|
Data type | Vector multipoint | Feature count | 14 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
A designated area of water where a single vessel, sea plane, etc... may anchor.
S-57 Object Class: Anchor berth
S-57 Acronym: ACHBRT
This data was compiled for the use in the scale range 1:90,000 to 1:350,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50054 |
---|---|
Data type | Vector multipoint | Feature count | 23 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |