New Zealand Data - Page 8

Orthophotography for BOPLASS ltd taken during 2010 and 2012. Coverage encompassed the wider Bay of Plenty.

Imagery was captured for the ‘Boplass ltd and Gisborne District Council’ by NZ Aerial Mapping Ltd, 208 Warren Street, PO Box 6, Hastings 4156, New Zealand.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 40cm pixel resolution (0.4m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-2.0m (@ 90% confidence).

Index tiles for this dataset are available as layer Bay of Plenty 0.4m Rural Aerial Photos Index Tiles (2010-2012).

Index Tiles ONLY, for actual orthophotos see layer Bay of Plenty 0.4m Rural Aerial Photos (2010-2012).

Orthophotography for BOPLASS ltd taken during 2010 and 2012. Coverage encompassed the wider Bay of Plenty.

Imagery was captured for the ‘Boplass ltd and Gisborne District Council’ by NZ Aerial Mapping Ltd, 208 Warren Street, PO Box 6, Hastings 4156, New Zealand.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 40cm pixel resolution (0.4m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-2.0m (@ 90% confidence).

This layer contains the DEM for LiDAR data for Bay of Plenty captured between 2018 and 2019.

• The DSM is available as layer Bay of Plenty LiDAR 1m DSM (2018-2019).

• The index tiles are available as layer Bay of Plenty LiDAR Index Tiles (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for BOPLASS Limited by AAM New Zealand from 7 December 2018 to 13 April 2019. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)

Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data for Bay of Plenty captured between 2018 and 2019.

• The DEM is available as layer Bay of Plenty LiDAR 1m DEM (2018-2019).

• The index tiles are available as layer Bay of Plenty LiDAR Index Tiles (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for BOPLASS Limited by AAM New Zealand from 7 December 2018 to 13 April 2019. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)

Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016

This layer contains the Index Tiles for LiDAR data for Bay of Plenty captured between 2018 and 2019.

• The DEM is available as layer Bay of Plenty LiDAR 1m DEM (2018-2019).

• The DSM is available as layer Bay of Plenty LiDAR 1m DSM (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for BOPLASS Limited by AAM New Zealand from 7 December 2018 to 13 April 2019. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)

Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016

A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.

S-57 Object Class: Beacon, cardinal

S-57 Acronym: BCNCAR

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.

S-57 Object Class: Beacon, cardinal

S-57 Acronym: BCNCAR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.

S-57 Object Class: Beacon, cardinal

S-57 Acronym: BCNCAR

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.

S-57 Object Class: Beacon, isolated danger

S-57 Acronym: BCNISD

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.

S-57 Object Class: Beacon, isolated danger

S-57 Acronym: BCNISD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/