NZ Survey Capture Areas (SCA)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12812
427
Added
22 Jul 2011

This dataset was first added to LINZ Data Service on 22 Jul 2011.

This layer provides cadastral Survey Capture Areas (SCA).

In conjunction with the implementation of Landonline in each region, LINZ undertook a project to "back-capture" existing parcel boundaries in the main centres of population and land development. It was intended to "back-capture" approximately 70 percent of existing parcels, which equates to about 20 percent of the land area of New Zealand.

The data capture known as "Populate Electronic Parcel" (PEP) was undertaken under contract by EDS.

The areas to be captured known as "Survey Capture Areas" (SCA) were defined in consultation with local LINZ staff, survey practitioners and Local Authorities.

Within the defined SCAs, the dimensions for surveyed right-lined boundaries of current parcels were captured from existing survey plans. In addition, sufficient traverses, boundary ties, and connections to the geodetic control were captured or surveyed to ensure adequate network geometry and strengthen areas where the boundary dimensions are unreliable. This survey network was adjusted to generate modern survey coordinates for all relevant nodes. Where the resulting boundaries comply with the accuracy requirements of the 1998 Survey Regulations, then the adjusted co-ordinates were declared to have SDC (Survey-accurate Digital Cadastre) status.

For more information see here

Layer ID 50840
Data type Vector multipolygon
Feature count 84
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

200 Mile Exclusive Economic Zone Outer Limits

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7469
549
Updated
01 Feb 2018

This dataset was last updated on LINZ Data Service on 01 Feb 2018.

New Zealand Exclusive Economic Zone

The exclusive economic zone (EEZ) is a zone extending from the outer limits of the territorial sea to a distance of 200 nautical miles from the baselines of the territorial sea in which New Zealand, as the coastal state, has sovereign rights over the living and non living resources of the sea and seabed and other states have certain freedoms, including the freedoms of navigation and overflight.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Layer ID 50842
Data type Vector multilinestring
Feature count 150
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

24 Mile Contiguous Zone Outer Limits

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4937
152
Added
26 Jul 2011

This dataset was first added to LINZ Data Service on 26 Jul 2011.

New Zealand Contiguous Zone

The contiguous zone is a zone of 12 nautical miles beyond the territorial sea in which New Zealand, as the coastal state, may take action to prevent or punish any infringement of its customs, fiscal, immigration or sanitary laws or regulations applicable within its land territory or territorial sea.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Layer ID 50843
Data type Vector linestring
Feature count 611
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

24 Mile Contiguous Zone Basepoints

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4492
57
Added
26 Jul 2011

This dataset was first added to LINZ Data Service on 26 Jul 2011.

New Zealand Contiguous Zone

The contiguous zone is a zone of 12 nautical miles beyond the territorial sea in which New Zealand, as the coastal state, may take action to prevent or punish any infringement of its customs, fiscal, immigration or sanitary laws or regulations
applicable within its land territory or territorial sea.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Layer ID 50844
Data type Vector point
Feature count 612
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

12 Mile Territorial Sea Limit Basepoints

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5661
180
Added
26 Jul 2011

This dataset was first added to LINZ Data Service on 26 Jul 2011.

New Zealand Territorial Seas

The territorial sea is the belt of sea adjacent to the coast out to a distance of 12 nautical miles from prescribed baselines over which New Zealand, as the coastal state, has the same rights of sovereignty that it exercises over its land territory subject to the right of innocent passage (and transit passage through any straits used for international navigation) of ships of other states. 'Innocent passage' excludes fishing activities.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Layer ID 50845
Data type Vector point
Feature count 941
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

12 Mile Territorial Sea Outer Limit

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10300
631
Added
26 Jul 2011

This dataset was first added to LINZ Data Service on 26 Jul 2011.

New Zealand Territorial Seas

The territorial sea is the belt of sea adjacent to the coast out to a distance of 12 nautical miles from prescribed baselines over which New Zealand, as the coastal state, has the same rights of sovereignty that it exercises over its land territory subject to the right of innocent passage (and transit passage through any straits used for international navigation) of ships of other states. 'Innocent passage' excludes fishing activities.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Layer ID 50846
Data type Vector linestring
Feature count 930
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5454
145
Updated
21 May 2014

This dataset was last updated on LINZ Data Service on 21 May 2014.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50861
Data type Image/Raster
Resolution 4.230m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Topo 50 Map Sheets

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4240
77
Updated
04 Aug 2014

This dataset was last updated on LINZ Data Service on 04 Aug 2014.

Polygon for each Topo50 map sheet holding extents of each sheet, it's sheet code, name, edition, and revision statement. This is the same information that is printed on each Topo50 map

Data Dictionary for linz_map_sheet: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50950
Data type Vector polygon
Feature count 4
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Building Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3584
62
Updated
04 Aug 2014

This dataset was last updated on LINZ Data Service on 04 Aug 2014.

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50951
Data type Vector point
Feature count 8
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Auckland Island Cemetery Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3950
45
Updated
21 May 2014

This dataset was last updated on LINZ Data Service on 21 May 2014.

A place for burying the dead.

Data Dictionary for cemetery_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50952
Data type Vector point
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 81 to 90 of 1499