Auckland Region Data

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

This layer contains the DEM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

• The DSM is available as layer Auckland South LiDAR 1m DSM (2016).

• The index tiles are available as layer Auckland South LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

• The DEM is available as layer Auckland South LiDAR 1m DEM (2016).

• The index tiles are available as layer Auckland South LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

This layer contains the Index Tiles for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

• The DEM is available as layer Auckland South LiDAR 1m DEM (2016).

• The DSM is available as layer Auckland South LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

A designated portion of water for the landing and take-off of sea-planes.

S-57 Object Class: Sea-plane landing area

S-57 Acronym: SPLARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Seaweed is the general name for marine plants of the Algae class which grow in long narrow ribbons. Kelp is one of an order (laminariales) of usually large, blade-shaped or vine-like brown algae.

S-57 Object Class: Weed/Kelp

S-57 Acronym: WEDKLP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Seaweed is the general name for marine plants of the Algae class which grow in long narrow ribbons. Kelp is one of an order (laminariales) of usually large, blade-shaped or vine-like brown algae.

S-57 Object Class: Weed/Kelp

S-57 Acronym: WEDKLP

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

The disturbance of water caused by the interaction of any combination of waves, currents, tidal streams, wind, shoal patches and obstructions.

S-57 Object Class: Water turbulence

S-57 Acronym: WATTUR

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

The disturbance of water caused by the interaction of any combination of waves, currents, tidal streams, wind, shoal patches and obstructions.

S-57 Object Class: Water turbulence

S-57 Acronym: WATTUR

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/