Canterbury Region Data - Page 10

A point on the ground where position (horizontal and vertical) is used as a base for a dependent survey. Also referred to as a control station.

S-57 Object Class: Control point

S-57 Acronym: CTRPNT

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. Precise-levelling surveys have been carried out throughout Canterbury and Christchurch to re-establish heights after these earthquakes.

Users may also be interested in the horizontal coordinates derived from GNSS data in the companion layers Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive and Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Horizontal Accuracy (standard deviation) approx 1m.
Vertical Accuracy of Lyttelton Vertical Datum 1937 heights (standard deviation) 0.005m.

Heights generated from precise levelling data undertaken to a misclose standard (mm) of 5*sqrt(k) where k is the distance in kilometres. Precise levelling in the Christchurch area was undertaken after the 23 December 2011 earthquake. Other areas were levelled after the most recent earthquake to have affected heights in that area. Heights therefore represent the position of marks accounting for all four substantial Canterbury earthquakes.

These heights are only provisional. Analysis is ongoing as further data is collected.
Heights calculated using SNAP v2.3.64.
Heights were constrained using the pre-earthquake heights at geodetic codes AC9B, AFAQ, AG32 and B853. GNSS observations and modelling indicates that the height change of these marks was negligible.
Some heights were calculated from precise levelling data provided by Christchurch City Council.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

The deformation model associated with the NZGD2000 datum was updated, nominally at 1 August 2013. The actual update of LINZ data took place on 14-15 December 2013. This update involved reverse patches, which means that the "reference coordinates" of features were updated. The main updates relate to the Christchurch earthquakes. The patch also updated coordinates affected by other South Island earthquakes since 2000.

These updates have been incorporated into Landonline and resulted in spatial updates to all features in the affected areas.

This data set contains contours indicating the extent and magnitude of the coordinate changes to assist in assessing the impact of this update on client data sets. This dataset is also available as a polyline.

For more information see here

The deformation model associated with the NZGD2000 datum was updated, nominally at 1 August 2013. The actual update of LINZ data took place on 14-15 December 2013. This update involved reverse patches, which means that the "reference coordinates" of features were updated. The main updates relate to the Christchurch earthquakes. The patch also updated coordinates affected by other South Island earthquakes since 2000.

These updates have been incorporated into Landonline and resulted in spatial updates to all features in the affected areas.

This data set contains contours indicating the extent and magnitude of the coordinate changes to assist in assessing the impact of this update on client data sets. This dataset is also available as a multipolygon.

For more information see here

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A special purpose buoy is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Buoy in general: A buoy whose appearance or purpose is not adequately known.

S-57 Object Class: Buoy, special purpose/general

S-57 Acronym: BOYSPP

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Currents (non-gravitational) include either singly or in combination: ocean currents (wind and/or density driven), inter-oceanic equalising currents, currents of navigable rivers, river outflow effects offshore and other non-tidal flows.

S-57 Object Class: Current - non-gravitational

S-57 Acronym: CURENT

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area of natural scenery on land. It is defined by its geographical characteristics and may be known by its proper name.

S-57 Object Class: Land region

S-57 Acronym: LNDRGN

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A relatively large natural stream of water.

S-57 Object Class: River

S-57 Acronym: RIVERS

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. The coordinates in this layer account for all significant movements relating to these, so should be consistent with any observations made after the last earthquake to affect a given area (neglecting localised deformation such as that due to liquefaction).

Users may also be interested in the more comprehensive data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council. No precise levelling data has been used.

The estimated accuracy is 0.02m horizontally and 0.03m vertically.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.