Canterbury Region Data - Page 2

A structure erected over a depression or an obstacle such as a body of water, railroad, etc... to provide a roadway for vehicles, pedestrians or to carry utility services.

S-57 Object Class: Bridge

S-57 Acronym: BRIDGE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A special purpose buoy is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Buoy in general: A buoy whose appearance or purpose is not adequately known.

S-57 Object Class: Buoy, special purpose/general

S-57 Acronym: BOYSPP

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A special purpose buoy is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Buoy in general: A buoy whose appearance or purpose is not adequately known.

S-57 Object Class: Buoy, special purpose/general

S-57 Acronym: BOYSPP

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DEM for LiDAR data from the Amberley area captured in 2012.
The DSM is available as layer Canterbury - Amberley LiDAR 1m DSM (2012).
The index tiles are available as layer Canterbury - Amberley LiDAR Index Tiles (2012).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 10 and 17 July 2012. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Amberley and Waipara township areas and adjacent coastal strips and river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is >1 pulse/square metre.

Vertical accuracy specification is +/- 0.20m (95%).
Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Amberley area captured in 2012.
The DEM is available as layer Canterbury - Amberley LiDAR 1m DEM (2012).
The index tiles are available as layer Canterbury - Amberley LiDAR Index Tiles (2012).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 10 and 17 July 2012. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Amberley and Waipara township areas and adjacent coastal strips and river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is >1 pulse/square metre.

Vertical accuracy specification is +/- 0.20m (95%).
Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Amberley area captured in 2012.
The DEM is available as layer Canterbury - Amberley LiDAR 1m DEM (2012).
The DSM is available as layer Canterbury - Amberley LiDAR 1m DSM (2012).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 10 and 17 July 2012. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Amberley and Waipara township areas and adjacent coastal strips and river corridors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is >1 pulse/square metre.

Vertical accuracy specification is +/- 0.20m (95%).
Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data for Banks Peninsula captured between 2018 and 2019.

• The DSM is available as layer Canterbury - Banks Peninsula LiDAR 1m DSM (2018-2019).

• The index tiles are available as layer Canterbury - Banks Peninsula LiDAR 1m Index Tiles (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys between July 2018 and February 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data for Banks Peninsula captured between 2018 and 2019.

• The DEM is available as layer Canterbury - Banks Peninsula LiDAR 1m DEM (2018-2019).

• The index tiles are available as layer Canterbury - Banks Peninsula LiDAR 1m Index Tiles (2018-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys between July 2018 and February 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016