Canterbury Region Data - Page 3

Raster chart image of: NZ 6212 Plans on the North East Coast of South Island

This data was compiled for the use at the following scale: 1:30000

File reference: NZ621202.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Raster chart image of: NZ 6212 Plans on the North East Coast of South Island - South Bay

This data was compiled for the use at the following scale: 1:10000

File reference: NZ621204.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Toitū Te Whenua Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

An artificial open waterway used for transportation, waterpower or irrigation.

Data Dictionary for canal_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Index Tiles ONLY, for actual orthophotos see layer Christchurch 0.075m Urban Aerial Photos (2015-16)

Orthophotography in the Christchurch City Council area taken in the flying season (summer period) 2015-16.
Coverage is of the urban areas within Christchurch City and Banks peninsula.

Imagery was captured for the ‘Christchurch City Council' by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:

• 6,993 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout.
  
• Tile layout in NZTM projection containing relevant information.
  

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:500 tiles.

Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 7.5cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF.

The final spatial accuracy is ±0.2m @ 90% confidence level in clear open spaces.

Index Tiles ONLY, for actual orthophotos see layer Canterbury 0.3m Rural Aerial Photos (2014-15)

Orthophotography for the Canterbury region taken in the flying season (summer period) 2014 - 2015. Coverage encompassed the Hurunui, and Kaikoura council areas.

Imagery was captured for the ‘Environment Canterbury’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,661 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:5,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.3m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-0.6m.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

For further information about this dataset, see the Canterbury earthquake information.

Coordinates computed by adding the effects of deep-seated movement to survey points that had authoritative survey-accurate digital cadastre (SDC) coordinates immediately prior to 4 September 2010 (the first Canterbury earthquake). Marks that did not have SDC status at that time are not included in the dataset. Deep-seated movements were evaluated using the NZGD2000 deformation model.

• The 'nod_id' column is the Landonline node id. This is the unique identifier for the mark.
• The 'current_name' column is the Landonline mark name. Many boundary marks do not have a name recorded in this dataset, because this information has not been digitally captured.
• The 'east_mtpleatm2000' and 'north_mtpleatm2000' columns are the east and north coordinates (metres) in terms of the Mt Pleasant 2000 transverse mercator projection. Rounded to the nearest centimetre.
• The 'coord_order' column is the Landonline coordinate order immediately prior to 4 September 2010.

The estimated absolute uncertainty of these coordinates is 0.09m at the 95% confidence level.

These coordinates are intended for the use of Licensed Cadastral Surveyors when locating boundaries in Christchurch, in accordance with the Rules for Cadastral Survey 2010 and associated guidance, particularly guidance relating to the earthquakes.

Raster chart image of: NZ 6321 Lyttelton Harbour / Whakaraupō - Port of Lyttelton

This data was compiled for the use at the following scale: 7500

File reference: NZ632102.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. This layer contains coordinates computed from GNSS fast static and network RTK surveys undertaken after the Canterbury earthquakes. It also includes Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights, derived from the GNSS data.

Users may also be interested in the simplified data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council and other public and private organisations. No precise levelling data has been used.

The uncertainty (one standard deviation) is 0.02m horizontally, and 0.03m vertically for NZGD2000 ellipsoidal heights. The uncertainty (one standard deviation) of the Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights is 0.05m.

The coordinates calculated prior to 2010-09-04 have been calculated from a combined adjustment including LINZ data and additional data provided by public and private organisations. These coordinates differ from those in the Geodetic Database and more accurately reflect the position of the mark immediately prior to the 2010-09-04 earthquake.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

Lyttelton Vertical Datum 1937 heights have been computed from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.47m to bring in terms of Lyttelton Vertical Datum 1937. Christchurch Drainage Datum (CDD) heights have been computed in the Christchurch area from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.523m (specifically calculated for Christchurch City) to bring in terms of Lyttelton Vertical Datum 1937 (for Christchurch) and a further offset of 9.04m to bring in terms of CDD.

The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2010-09-04 earthquake was provided by GNS Science (Darfield_Sep2010_model_8.5_grid_displacements_calcs.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-02-22 earthquake was provided by GNS Science (Chch_Feb2011_geodetic_source_model_3.21.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-06-13 earthquake was provided by GNS Science (Chch_Jun2011_geodetic_source_model_0.4.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-12-23 earthquake was provided by GNS Science (Chch_Dec2011_geodetic_source_model_0.2.xls).

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For full information about this dataset, see the Canterbury earthquake information on the LINZ website.