Canterbury Region Data - Page 9

An area in the sea, used for aquatic cultivation.

Data Dictionary for marine_farm_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-m...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A mechanical apparatus for moving bulk material or people from place to place (as by a moving belt or chain of receptacles).

S-57 Object Class: Conveyor

S-57 Acronym: CONVYR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An area of broken, fast flowing water in a stream, where the slope of the bed increases (but without a prominent break of slope which might result in a cascade or waterfall), or where a gently dipping bar of harder rock outcrops

Data Dictionary for rapid_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

a conveyor system in which carrier units run on wire or rope cables strung between supports for transporting skiers up the slope - the skier remains in contact with the ground whilst being towed up the slope

Data Dictionary for ski_tow_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-s...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Industrial cableway; a conveyor system built primarily for the transport of material for industry, power production etc, in which a carrier unit or units run on wire cables strung between supports.

Data Dictionary for cableway_industrial_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A tall framework or structure, the elevation of which is functional

Data Dictionary for tower_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-t...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

This layer contains the index tiles for LiDAR data from the Hurunui District captured in 2013.
The DEM is available as layer Canterbury - Hurunui Rivers LiDAR 1m DEM (2013).
The DSM is available as layer Canterbury - Hurunui Rivers LiDAR 1m DSM (2013).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys in May 2013. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes Hanmer Springs, Hanmer Plain, Waiau, Waiau River, Hurunui River, Pahau River, and Culverden. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

Orthophotography for urban areas across Christchurch City totalling approximately 524 km2. Taken in the flying season (summer period) 2018-19. The area of capture is located in the Canterbury Region of the South Island.

Imagery was captured for Environmental Canterbury by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
• 7984 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout for specific details, naming conventions, etc.

Imagery supplied as 7.5 cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 95% confidence level.

Index tiles for this dataset are available as layer Christchurch 0.075m Urban Aerial Photos Index Tiles (2018-2019)

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DEM for LiDAR data from the Rangiora area captured in 2014.
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.