Signal station, traffic points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1945
52
Updated
19 Dec 2018

This dataset was last updated on LINZ Data Service on 19 Dec 2018.

A signal station is a place on shore from which signals are made to ships at sea. Traffic signal stations regulate the movement of traffic.

S-57 Object Class: Signal station, traffic

S-57 Acronym: SISTAT

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50739
Data type Vector point
Feature count 3
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pilot boarding place points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1943
52
Updated
16 Jul 2018

This dataset was last updated on LINZ Data Service on 16 Jul 2018.

The meeting place to which the pilot comes out.

S-57 Object Class: Pilot boarding place

S-57 Acronym: PILBOP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50711
Data type Vector point
Feature count 10
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Buoy, special purpose/general points (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1954
36
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A special purpose buoy is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Buoy in general: A buoy whose appearance or purpose is not adequately known.

S-57 Object Class: Buoy, special purpose/general

S-57 Acronym: BOYSPP

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50380
Data type Vector point
Feature count 3
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Daymark points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1928
54
Updated
16 Jul 2018

This dataset was last updated on LINZ Data Service on 16 Jul 2018.

The identifying characteristics of an aid to navigation which serve to facilitate its recognition against a daylight viewing background. On those structures that do not by themselves present an adequate viewing area to be seen at the required distance, the aid is made more visible by affixing a daymark to the structure. A daymark so affixed has a distinctive colour and shape depending on the purpose of the aid.

S-57 Object Class: Daymark

S-57 Acronym: DAYMAR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50669
Data type Vector point
Feature count 11
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury - Rangiora LiDAR 1m DEM (2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2884
211
Added
10 Jan 2017

This dataset was first added to LINZ Data Service on 10 Jan 2017.

This layer contains the DEM for LiDAR data from the Rangiora area captured in 2014.
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

Layer ID 53552
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Dumping ground polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1892
71
Updated
19 Dec 2018

This dataset was last updated on LINZ Data Service on 19 Dec 2018.

A sea area where dredged material or other potentially more harmful material, e.g. explosives, chemical waste, is deliberately deposited.

S-57 Object Class: Dumping ground

S-57 Acronym: DMPGRD

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50674
Data type Vector multipolygon
Feature count 13
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Tideway polyline (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1892
56
Updated
16 Jul 2018

This dataset was last updated on LINZ Data Service on 16 Jul 2018.

A natural water course in intertidal areas where water flows during the ebb or flow. A channel through which a tidal current runs.

S-57 Object Class: Tideway

S-57 Acronym: TIDEWY

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51078
Data type Vector multilinestring
Feature count 22
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Survey Mark Movements

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2485
102
Added
12 Sep 2016

This dataset was first added to LINZ Data Service on 12 Sep 2016.

This layer details the movement of survey marks due to the Canterbury Earthquake Sequence (CES). The movements include the impact of 5 major earthquakes on 4 September 2010, 22 February 2011, 13 June 2011, 23 December 2011 and 14 February 2016.

Note that these movements apply only at the survey mark. Nearby land may have moved differently, especially in areas impacted by substantial shallow ground movement.

For further earthquake information, see the Canterbury earthquake information on the LINZ website.

Scope

Movements do not include the regular tectonic movement (not related to earthquakes) of approximately 5cm per year.

As well as Christchurch, the data covers Lyttelton, Spencerville, Kaiapoi, Pines Beach, Woodend, Pegasus and Waikuku Beach.

Mark Movement Calculations

Observed mark movements have been calculated from geodetic and cadastral survey data collected at the same physical survey mark before and after the earthquakes. Various filters have been applied to ensure as far as practicable that the movements reflect real-world earthquake-related movements of marks. For example, only non-boundary marks that have been directly measured (rather than adopted) are included.

Modelled mark movements have been calculated using models of the tectonic-scale movements resulting from each earthquake, supplied by GNS Science, supplemented with more detailed modelling carried out by LINZ. These models typically represent deep-seated movement only. They do not include shallow movement, such as that resulting from liquefaction.

Therefore the difference between the post-earthquake observed and post-earthquake modelled position generally represents shallow ground movement. The difference between the post-earthquake modelled and pre-earthquake observed position generally represents deep-seated movement. The difference between the post-earthquake observed position and pre-earthquake observed position represents total movement due to the earthquakes.

Accuracy

The uncertainty of the coordinate changes is 0.1m at a 95% confidence interval.

Layer Attributes

  • nod_id_post_eq: Landonline node id for the latest post-earthquake node (mark)
  • code_post_eq: Geodetic code for the latest post-earthquake node
  • name_post_eq: Mark name for the latest post-earthquake node
  • nod_id_pre_eq: Landonline node id for the pre-earthquake node (mark)
  • code_pre_eq: Geodetic code for the pre-earthquake node
  • name_pre_eq: Mark name for the pre-earthquake node
  • de_mod_obs: East change from modelled post-earthquake to observed post-earthquake position
  • dn_mod_obs: North change from modelled post-earthquake to observed post-earthquake position
  • hz_mod_obs: Horizontal change from modelled post-earthquake to observed post-earthquake position
  • bg_mod_obs: Bearing from modelled post-earthquake to observed post-earthquake position
  • de_pre_mod: East change from observed pre-earthquake to modelled post-earthquake position
  • dn_pre_mod: North change from observed pre-earthquake to modelled post-earthquake position
  • hz_pre_mod: Horizontal change from observed pre-earthquake to modelled post-earthquake position
  • bg_pre_mod: Bearing from observed pre-earthquake to modelled post-earthquake position
  • de_pre_obs: East change from observed pre-earthquake to observed post-earthquake position
  • dn_pre_obs: North change from observed pre-earthquake to observed post-earthquake position
  • hz_pre_obs: Horizontal change from observed pre-earthquake to observed post-earthquake position
  • bg_pre_obs: Bearing from observed pre-earthquake to observed post-earthquake position
Layer ID 53455
Data type Vector point
Feature count 8882
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pilot boarding place polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1782
49
Updated
16 Jul 2018

This dataset was last updated on LINZ Data Service on 16 Jul 2018.

The meeting place to which the pilot comes out.

S-57 Object Class: Pilot boarding place

S-57 Acronym: PILBOP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50712
Data type Vector multipolygon
Feature count 5
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bathymetric Surface Model Index – Third Party

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1804
7
Updated
26 Mar 2019

This dataset was last updated on LINZ Data Service on 26 Mar 2019.

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

Layer ID 95575
Data type Vector multipolygon
Feature count 67
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 70 of 101