Christchurch City Data

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Raster chart image of: NZ 6324 Akaroa Harbour - French Bay

This data was compiled for the use at the following scale: 1:15000

File reference: NZ632402.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Toitū Te Whenua Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Raster chart image of: NZ 6321 Lyttelton Harbour / Whakaraupō - Port of Lyttelton

This data was compiled for the use at the following scale: 7500

File reference: NZ632102.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

This layer contains the DSM for LiDAR data from the Rangiora area captured in 2014.
The DEM is available as layer Canterbury - Rangiora LiDAR 1m DEM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Rangiora area captured in 2014.
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Christchurch and Selwyn areas captured in 2015.
The DEM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DEM (2015).
The index tiles are available as layer Canterbury - Christchurch and Selwyn LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM between 5 October and 7 November 2015. The datasets were generated by AAM and their subcontractors. The survey area includes Christchurch City and parts of the Selwyn district. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 4 pulses/square metre.

Vertical accuracy specification is +/- 0.20m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Christchurch and Selwyn areas captured in 2015.
The DEM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DEM (2015).
The DSM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM between 5 October and 7 November 2015. The datasets were generated by AAM and their subcontractors. The survey area includes Christchurch City and parts of the Selwyn district. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 4 pulses/square metre.

Vertical accuracy specification is +/- 0.20m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Christchurch and Selwyn areas captured in 2015.
The DSM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DSM (2015).
The index tiles are available as layer Canterbury - Christchurch and Selwyn LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM between 5 October and 7 November 2015. The datasets were generated by AAM and their subcontractors. The survey area includes Christchurch City and parts of the Selwyn district. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 4 pulses/square metre.

Vertical accuracy specification is +/- 0.20m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data for the Canterbury Region, captured between 1 May 2020 and 12 November 2020.

• The DEM is available as layer Canterbury LiDAR 1m DEM (2020).

• The DSM is available as layer Canterbury LiDAR 1m DSM (2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys Ltd between 1 May 2020 and 12 November 2020. These datasets were generated by Arial Surveys Ltd and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data for the Canterbury Region, captured between 1 May 2020 and 12 November 2020.

• The DSM is available as layer Canterbury LiDAR 1m DSM (2020).

• The index tiles are available as layer Canterbury LiDAR Index Tiles (2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys Ltd between 1 May 2020 and 12 November 2020. These datasets were generated by Arial Surveys Ltd and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.