Inlets-Banks Peninsula Bays Data

Raster chart image of: NZ 6324 Akaroa Harbour

This data was compiled for the use at the following scale: 1:30000

File reference: NZ632401.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A long heavy timber or section of steel, wood, concrete, etc.. forced into the earth which may serve as a support, as for a pier, or a free standing pole within a marine environment.

S-57 Object Class: Pile

S-57 Acronym: PILPNT

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A special purpose buoy is primarily used to indicate an area or feature, the nature of which is apparent from reference to a chart, Sailing Directions or Notices to Mariners. Buoy in general: A buoy whose appearance or purpose is not adequately known.

S-57 Object Class: Buoy, special purpose/general

S-57 Acronym: BOYSPP

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A designated area of water where a single vessel, sea plane, etc... may anchor.

S-57 Object Class: Anchor berth

S-57 Acronym: ACHBRT

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Orthophotography within the Canterbury Region taken in the flying seasons (summer periods) 2019-2020. Coverage is of the Canterbury region covering part of the Banks Peninsula area.

Imagery was captured for Environment Canterbury by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany ,0632, New Zealand.

Data comprises:
•1779 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the index tiles layer for specific details, naming conventions, etc.

Imagery supplied as 7.5 cm pixel resolution (0.075 m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 68% confidence level.

Index tiles for this dataset are available as layer Banks Peninsula 0.075m Urban Aerial Photos Index Tiles (2019-2020)

Index Tiles ONLY, for actual orthophotos see layer Banks Peninsula 0.075m Urban Aerial Photos (2019-2020)

Orthophotography within the Canterbury Region taken in the flying seasons (summer periods) 2019-2020. Coverage is of the Canterbury region covering part of the Banks Peninsula area.

Imagery was captured for Environment Canterbury by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany ,0632, New Zealand.

Data comprises:
•1779 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the index tiles layer for specific details, naming conventions, etc.

Imagery supplied as 7.5 cm pixel resolution (0.075 m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 68% confidence level.