Airport/airfield points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2661
78
Updated
12 Jul 2018

This dataset was last updated on LINZ Data Service on 12 Jul 2018.

An area containing at least one runway, used for landing, take-off, and movement of aircraft.

S-57 Object Class: Airport/airfield

S-57 Acronym: AIRARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50056
Data type Vector point
Feature count 9
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, lateral points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2001
67
Updated
18 Dec 2018

This dataset was last updated on LINZ Data Service on 18 Dec 2018.

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A lateral beacon is used to indicate the port or starboard hand side of the route to be followed. They are generally used for well defined channels and are used in conjunction with a conventional direction of buoyage.

S-57 Object Class: Beacon, lateral

S-57 Acronym: BCNLAT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50060
Data type Vector point
Feature count 71
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Built-up area polygon (Hydro, 1:1.5mil and smaller)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2435
43
Updated
17 Dec 2018

This dataset was last updated on LINZ Data Service on 17 Dec 2018.

An area containing a concentration of buildings and the supporting road or rail infrastructure.

S-57 Object Class: Built-up area

S-57 Acronym: BUAARE

This data was compiled for the use in the scale range 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51644
Data type Vector multipolygon
Feature count 17
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury - Rangiora LiDAR 1m DEM (2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2884
211
Added
10 Jan 2017

This dataset was first added to LINZ Data Service on 10 Jan 2017.

This layer contains the DEM for LiDAR data from the Rangiora area captured in 2014.
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

Layer ID 53552
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury - Rangiora LiDAR 1m DSM (2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1523
55
Added
10 Jan 2017

This dataset was first added to LINZ Data Service on 10 Jan 2017.

This layer contains the DSM for LiDAR data from the Rangiora area captured in 2014.
The DEM is available as layer Canterbury - Rangiora LiDAR 1m DEM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

Layer ID 53553
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury - Rangiora LiDAR Index Tiles (2014)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1452
42
Added
06 Mar 2017

This dataset was first added to LINZ Data Service on 06 Mar 2017.

This layer contains the index tiles for LiDAR data from the Rangiora area captured in 2014.
The DEM is available as layer Canterbury - Rangiora LiDAR 1m DEM (2014).
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

Layer ID 53573
Data type Vector polygon
Feature count 1626
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury 0.3m Rural Aerial Photos Index Tiles (2014-2015)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2476
85
Added
15 Sep 2015

This dataset was first added to LINZ Data Service on 15 Sep 2015.

Index Tiles ONLY, for actual orthophotos see layer Canterbury 0.3m Rural Aerial Photos (2014-15)

Orthophotography for the Canterbury region taken in the flying season (summer period) 2014 - 2015. Coverage encompassed the Hurunui, and Kaikoura council areas.

Imagery was captured for the ‘Environment Canterbury’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,661 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:5,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.3m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-0.6m.

Layer ID 52427
Data type Vector polygon
Feature count 1661
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6125
228
Added
26 Apr 2013

This dataset was first added to LINZ Data Service on 26 Apr 2013.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. This layer contains coordinates computed from GNSS fast static and network RTK surveys undertaken after the Canterbury earthquakes. It also includes Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights, derived from the GNSS data.

Users may also be interested in the simplified data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council and other public and private organisations. No precise levelling data has been used.

The uncertainty (one standard deviation) is 0.02m horizontally, and 0.03m vertically for NZGD2000 ellipsoidal heights. The uncertainty (one standard deviation) of the Lyttelton Vertical Datum 1937 and Christchurch Drainage Datum heights is 0.05m.

The coordinates calculated prior to 2010-09-04 have been calculated from a combined adjustment including LINZ data and additional data provided by public and private organisations. These coordinates differ from those in the Geodetic Database and more accurately reflect the position of the mark immediately prior to the 2010-09-04 earthquake.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

Lyttelton Vertical Datum 1937 heights have been computed from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.47m to bring in terms of Lyttelton Vertical Datum 1937. Christchurch Drainage Datum (CDD) heights have been computed in the Christchurch area from NZGD2000 ellipsoidal heights by subtracting NZGeoid2009 geoid heights and adding an offset of 0.523m (specifically calculated for Christchurch City) to bring in terms of Lyttelton Vertical Datum 1937 (for Christchurch) and a further offset of 9.04m to bring in terms of CDD.

The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2010-09-04 earthquake was provided by GNS Science (Darfield_Sep2010_model_8.5_grid_displacements_calcs.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-02-22 earthquake was provided by GNS Science (Chch_Feb2011_geodetic_source_model_3.21.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-06-13 earthquake was provided by GNS Science (Chch_Jun2011_geodetic_source_model_0.4.xls). The model used to estimate whether movements greater than 2cm occurred at a mark (excluding those due to liquefaction or other localised deformation) after the 2011-12-23 earthquake was provided by GNS Science (Chch_Dec2011_geodetic_source_model_0.2.xls).

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For full information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51588
Data type Vector point
Feature count 818
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2966
92
Added
26 Apr 2013

This dataset was first added to LINZ Data Service on 26 Apr 2013.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. The coordinates in this layer account for all significant movements relating to these, so should be consistent with any observations made after the last earthquake to affect a given area (neglecting localised deformation such as that due to liquefaction).

Users may also be interested in the more comprehensive data in the companion layer Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive.

These coordinates are only provisional. Analysis is ongoing as further data is collected. Coordinates were calculated using SNAP v2.3.61. Stations were constrained using coordinates calculated by GNS Science. Some coordinates were calculated from data provided by Christchurch City Council. No precise levelling data has been used.

The estimated accuracy is 0.02m horizontally and 0.03m vertically.

The deformation model igns2011_working.grd calculated from a model (v4) provided by GNS Science on 28 April 2011 was used to remove secular deformation.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51589
Data type Vector point
Feature count 719
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Canterbury Earthquake Precise-Levelling Heights (2010, 2011)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2758
107
Updated
04 Sep 2014

This dataset was last updated on LINZ Data Service on 04 Sep 2014.

The Canterbury region of New Zealand experienced a sequence of significant earthquakes during 2010 and 2011. These earthquakes occurred on 2010-09-04, 2011-02-22, 2011-06-13 and 2011-12-23. Precise-levelling surveys have been carried out throughout Canterbury and Christchurch to re-establish heights after these earthquakes.

Users may also be interested in the horizontal coordinates derived from GNSS data in the companion layers Canterbury Earthquake Geodetic Marks (2010, 2011) - Comprehensive and Canterbury Earthquake Geodetic Marks (2010, 2011) - Simple

Horizontal Accuracy (standard deviation) approx 1m.
Vertical Accuracy of Lyttelton Vertical Datum 1937 heights (standard deviation) 0.005m.

Heights generated from precise levelling data undertaken to a misclose standard (mm) of 5*sqrt(k) where k is the distance in kilometres. Precise levelling in the Christchurch area was undertaken after the 23 December 2011 earthquake. Other areas were levelled after the most recent earthquake to have affected heights in that area. Heights therefore represent the position of marks accounting for all four substantial Canterbury earthquakes.

These heights are only provisional. Analysis is ongoing as further data is collected.
Heights calculated using SNAP v2.3.64.
Heights were constrained using the pre-earthquake heights at geodetic codes AC9B, AFAQ, AG32 and B853. GNSS observations and modelling indicates that the height change of these marks was negligible.
Some heights were calculated from precise levelling data provided by Christchurch City Council.

These coordinates are suitable for use in surveys and other geospatial activities in Canterbury and Christchurch.

For further information about this dataset, see the Canterbury earthquake information on the LINZ website.

Layer ID 51688
Data type Vector point
Feature count 600
Primary key nod_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 41