Waimakariri District Data

This layer contains the Index Tiles for LiDAR data in the Canterbury Region surronding Christchurch and the Ashley River between 2018 and 2019.

• The DEM is available as layer Canterbury - Christchurch and Ashley River 1m DEM (2018).

• The DSM is available as layer Canterbury - Christchurch and Ashley River 1m DSM (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys from 20 July 2018 to 01 March 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2.14 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 1.0m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Canterbury Region surronding Christchurch and the Ashley River between 2018 and 2019.

• The DEM is available as layer Canterbury - Christchurch and Ashley River 1m DEM (2018).

• The index tiles are available as layer Canterbury - Christchurch and Ashley River LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys from 20 July 2018 to 01 March 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2.14 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 1.0m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Canterbury Region surronding Christchurch and the Ashley River between 2018 and 2019.

• The DSM is available as layer Canterbury - Christchurch and Ashley River 1m DSM (2018).

• The index tiles are available as layer Canterbury - Christchurch and Ashley River LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Environment Canterbury Regional Council by Aerial Surveys from 20 July 2018 to 01 March 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2.14 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 1.0m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Rangiora area captured in 2014.
The DEM is available as layer Canterbury - Rangiora LiDAR 1m DEM (2014).
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Rangiora area captured in 2014.
The DEM is available as layer Canterbury - Rangiora LiDAR 1m DEM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Rangiora area captured in 2014.
The DSM is available as layer Canterbury - Rangiora LiDAR 1m DSM (2014).
The index tiles are available as layer Canterbury - Rangiora LiDAR Index Tiles (2014).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waimakariri District Council and Environment Canterbury Regional Council by Aerial Surveys in March – June 2014. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Rangiora township area and the lower Ashley, Eyre, and Waimakariri river channels. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1 pulse/square metre.

Vertical datum is NZVD2016.

This layer details the movement of survey marks due to the Canterbury Earthquake Sequence (CES). The movements include the impact of 5 major earthquakes on 4 September 2010, 22 February 2011, 13 June 2011, 23 December 2011 and 14 February 2016.

Note that these movements apply only at the survey mark. Nearby land may have moved differently, especially in areas impacted by substantial shallow ground movement.

For further earthquake information, see the Canterbury earthquake information on the LINZ website.

Scope

Movements do not include the regular tectonic movement (not related to earthquakes) of approximately 5cm per year.

As well as Christchurch, the data covers Lyttelton, Spencerville, Kaiapoi, Pines Beach, Woodend, Pegasus and Waikuku Beach.

Mark Movement Calculations

Observed mark movements have been calculated from geodetic and cadastral survey data collected at the same physical survey mark before and after the earthquakes. Various filters have been applied to ensure as far as practicable that the movements reflect real-world earthquake-related movements of marks. For example, only non-boundary marks that have been directly measured (rather than adopted) are included.

Modelled mark movements have been calculated using models of the tectonic-scale movements resulting from each earthquake, supplied by GNS Science, supplemented with more detailed modelling carried out by LINZ. These models typically represent deep-seated movement only. They do not include shallow movement, such as that resulting from liquefaction.

Therefore the difference between the post-earthquake observed and post-earthquake modelled position generally represents shallow ground movement. The difference between the post-earthquake modelled and pre-earthquake observed position generally represents deep-seated movement. The difference between the post-earthquake observed position and pre-earthquake observed position represents total movement due to the earthquakes.

Accuracy

The uncertainty of the coordinate changes is 0.1m at a 95% confidence interval.

Layer Attributes

• nod_id_post_eq: Landonline node id for the latest post-earthquake node (mark)
• code_post_eq: Geodetic code for the latest post-earthquake node
• name_post_eq: Mark name for the latest post-earthquake node
• nod_id_pre_eq: Landonline node id for the pre-earthquake node (mark)
• code_pre_eq: Geodetic code for the pre-earthquake node
• name_pre_eq: Mark name for the pre-earthquake node
• de_mod_obs: East change from modelled post-earthquake to observed post-earthquake position
• dn_mod_obs: North change from modelled post-earthquake to observed post-earthquake position
• hz_mod_obs: Horizontal change from modelled post-earthquake to observed post-earthquake position
• bg_mod_obs: Bearing from modelled post-earthquake to observed post-earthquake position
• de_pre_mod: East change from observed pre-earthquake to modelled post-earthquake position
• dn_pre_mod: North change from observed pre-earthquake to modelled post-earthquake position
• hz_pre_mod: Horizontal change from observed pre-earthquake to modelled post-earthquake position
• bg_pre_mod: Bearing from observed pre-earthquake to modelled post-earthquake position
• de_pre_obs: East change from observed pre-earthquake to observed post-earthquake position
• dn_pre_obs: North change from observed pre-earthquake to observed post-earthquake position
• hz_pre_obs: Horizontal change from observed pre-earthquake to observed post-earthquake position
• bg_pre_obs: Bearing from observed pre-earthquake to observed post-earthquake position

Index Tiles ONLY, for actual orthophotos see layer Waimakariri 0.075m Urban Aerial Photos (2015-16)

Orthophotography in the Waimakariri District Council area taken in the flying season (summer period) 2015-16.
Coverage is of urban areas within the Waimakariri District.

Imagery was captured for the ‘Waimakariri District Council' by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:

• 1,116 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout.
• Tile layout in NZTM projection containing relevant information.
  

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:500 tiles.

Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 7.5cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF.

The final spatial accuracy is ±0.2m @ 90% confidence level in clear open spaces.

Orthophotography in the Waimakariri District Council area taken in the flying season (summer period) 2015-16.
Coverage is of urban areas within the Waimakariri District.

Imagery was captured for the ‘Waimakariri District Council' by AAM NZ Limited, 6 Ossian St, NAPIER, New Zealand.

Data comprises:

• 1,116 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout.
  
• Tile layout in NZTM projection containing relevant information.
  

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:500 tiles.

Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 7.5cm pixel resolution (0.075m GSD), 3-band (RGB) uncompressed GeoTIFF.

The final spatial accuracy is ±0.2m @ 90% confidence level in clear open spaces.

Index tiles for this dataset are available as layer Waimakariri 0.075m Urban Aerial Photos Index Tiles (2015-16)

Index Tiles ONLY, for actual orthophotos see layer Canterbury 0.3m Rural Aerial Photos (2014-15)

Orthophotography for the Canterbury region taken in the flying season (summer period) 2014 - 2015. Coverage encompassed the Hurunui, and Kaikoura council areas.

Imagery was captured for the ‘Environment Canterbury’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,661 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:5,000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into NZTopo50 1:5,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.3m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is +/-0.6m.