Pile points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5219
91
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A long heavy timber or section of steel, wood, concrete, etc.. forced into the earth which may serve as a support, as for a pier, or a free standing pole within a marine environment.

S-57 Object Class: Pile

S-57 Acronym: PILPNT

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50590
Data type Vector multipoint
Feature count 99
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Anchorage area polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5178
102
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50635
Data type Vector multipolygon
Feature count 69
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Sand Polygons (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5200
185
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

Sand: crushed rock, shells etc smaller than 2mm in size

Data Dictionary for sand_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50235
Data type Vector polygon
Feature count 363
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marlborough 0.4m Rural Aerial Photos Index Tiles (2011-2012)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5129
98
Added
11 Feb 2014

This dataset was first added to LINZ Data Service on 11 Feb 2014.

Index Tiles ONLY, for actual orthophotos see layer Marlborough 0.4m Rural Aerial Photos (2011 - 2012)

Orthophotography for the Marlborough region taken during 2011 - 2012. Coverage encompassed parts of the Marlborough District Councils area.

Imagery was captured for the Marlborough District Councils and Terralink International Ltd ’ by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data has subsequently been provided to LINZ and this comprises:
• 3,610 x ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:2,000 tile layout or 1:1:1.000 tile layout.
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. The products are tiled into either 1:1,000 or1:2,000 tiles. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 40cm pixel resolution (0.4m GSD), 3-band (RGB) uncompressed GeoTIFF.
The final spatial accuracy varies from +/-2.0m (@ 95% confidence) to +/-10m (@ 95% confidence) - please refer to the supplied tile layout shape file for specific details.

Layer ID 51903
Data type Vector polygon
Feature count 3610
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Nelson 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5334
75
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The NSN55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Nelson 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

NSN55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Nelson 1955 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the Nelson 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of NSN55-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53438
Data type Vector point
Feature count 6580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Racetrack Points (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5179
107
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

A course laid out for racing

Data Dictionary for racetrack_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50220
Data type Vector point
Feature count 46
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Tunnel Centrelines (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5160
148
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

An underground passage

Data Dictionary for tunnel_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50230
Data type Vector linestring
Feature count 98
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Anchorage area polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5110
100
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50521
Data type Vector multipolygon
Feature count 58
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Shoreline construction points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5060
84
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A fixed (not afloat) artificial structure between the water and the land, i.e. a man-made coastline.

S-57 Object Class: Shoreline construction

S-57 Acronym: SLCONS

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 51077
Data type Vector multipoint
Feature count 45
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Water Race Centrelines (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5107
134
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

A man-made water channel, often running parallel to the contours, built specifically for the distribution of water to crops, pasture, mining activities etc

Data Dictionary for water_race_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50229
Data type Vector linestring
Feature count 25
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 51 to 60 of 115