Marlborough Region Data

A structure in shallow water for fishing purposes which can be an obstruction to ships in general. The position of these structures may vary frequently over time.

S-57 Object Class: Fishing facility

S-57 Acronym: FSHFAC

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A structure for the military defence of a site.

S-57 Object Class: Fortified structure

S-57 Acronym: FORSTC

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Index Tiles ONLY, for actual orthophotos see layer Marlborough 0.1m Urban Aerial Photos (2017)

Orthophotography in the Marlborough District taken in the flying seasons (summer period) 2017-2018.

Imagery was captured for Marlborough District Council by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•3,037 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 10cm pixel resolution (0.10m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 68% confidence level.

Index Tiles ONLY, for actual orthophotos see layer Marlborough 0.3m Rural Aerial Photos (2017-2018)

Orthophotography in the Marlborough District taken in the flying seasons (summer period) 2017-2018.

Imagery was captured for Marlborough District Council by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,142 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1000 tile layout
•3,607 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:2000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.30m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.60 m @ 90% confidence level.

Orthophotography in the Marlborough District taken in the flying seasons (summer period) 2017-2018.

Imagery was captured for Marlborough District Council by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•3,037 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:500 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 10cm pixel resolution (0.10m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.15 m @ 68% confidence level.

Index tiles for this dataset are available as layer Marlborough 0.1m Urban Aerial Photos Index Tiles (2017)

Orthophotography in the Marlborough District taken in the flying seasons (summer period) 2017-2018.

Imagery was captured for Marlborough District Council by Aerial Surveys Ltd, Unit A1, 8 Saturn Place, Albany,0632, New Zealand.

Data comprises:
•1,142 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:1000 tile layout
•3,607 ortho-rectified RGB GeoTIFF images in NZTM projection, tiled into the LINZ Standard 1:2000 tile layout
•Tile layout in NZTM projection containing relevant information.

The supplied imagery is in terms of New Zealand Transverse Mercator (NZTM) map projection. Please refer to the supplied tile layout shape file for specific details, naming conventions, etc.

Imagery supplied as 30cm pixel resolution (0.30m GSD), 3-band (RGB) uncompressed GeoTIFF. The final spatial accuracy is ±0.60 m @ 90% confidence level.

Index tiles for this dataset are available as layer Marlborough 0.3m Rural Aerial Photos Index Tiles (2017-2018)

This layer contains the Index Tiles for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

This layer contains the DSM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.