Nelson 1955 to NZVD2016 Conversion

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5440
75
Updated
03 Aug 2016

This dataset was last updated on LINZ Data Service on 03 Aug 2016.

The NSN55-NZVD2016 grid enables the conversion of normal-orthometric heights from the Nelson 1955 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

NSN55-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Nelson 1955 vertical datum (171.3° E to 174.4° E, 40.4° S to 42.7° S).

The height conversion grid models the difference between the Nelson 1955 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of NSN55-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

Layer ID 53438
Data type Vector point
Feature count 6580
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Sand Polygons (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5304
185
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

Sand: crushed rock, shells etc smaller than 2mm in size

Data Dictionary for sand_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50235
Data type Vector polygon
Feature count 363
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Airport/airfield points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5316
103
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An area containing at least one runway, used for landing, take-off, and movement of aircraft.

S-57 Object Class: Airport/airfield

S-57 Acronym: AIRARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50056
Data type Vector multipoint
Feature count 9
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, cardinal points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5333
81
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A beacon is a prominent, specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. A cardinal beacon is used in conjunction with the compass to indicate where the mariner may find the best navigable water. It is placed in one of the four quadrants (North, East, South and West), bounded by inter-cardinal bearings from the point marked.

S-57 Object Class: Beacon, cardinal

S-57 Acronym: BCNCAR

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50058
Data type Vector multipoint
Feature count 17
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Racetrack Points (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5271
107
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

A course laid out for racing

Data Dictionary for racetrack_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50220
Data type Vector point
Feature count 46
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pile points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5259
91
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A long heavy timber or section of steel, wood, concrete, etc.. forced into the earth which may serve as a support, as for a pier, or a free standing pole within a marine environment.

S-57 Object Class: Pile

S-57 Acronym: PILPNT

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50590
Data type Vector multipoint
Feature count 99
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Mud Polygons (Topo, 1:500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5196
140
Added
22 May 2011

This dataset was first added to LINZ Data Service on 22 May 2011.

An area of wet, soft earthy matter

Data Dictionary for mud_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

Layer ID 50216
Data type Vector polygon
Feature count 239
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine farm/culture points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4917
125
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

An assemblage of cages, nets, rafts and floats or posts where fish, including shellfish, are artificially cultivated. Also called fish farm.

S-57 Object Class: Marine farm/culture

S-57 Acronym: MARCUL

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50578
Data type Vector multipoint
Feature count 368
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bathymetric Surface Model Index – Third Party

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5011
29
Updated
26 Mar 2019

This dataset was last updated on LINZ Data Service on 26 Mar 2019.

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

Layer ID 95575
Data type Vector multipolygon
Feature count 67
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Administration Area (Named) polygon (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4896
99
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50055
Data type Vector multipolygon
Feature count 19
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 69