NZ Rapid Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8057
748
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

An area of broken, fast flowing water in a stream, where the slope of the bed increases (but without a prominent break of slope which might result in a cascade or waterfall), or where a gently dipping bar of harder rock outcrops

Data Dictionary for rapid_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50321
Data type Vector polygon
Feature count 170
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Canal Polygons (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8545
1016
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

An artificial open waterway used for transportation, waterpower or irrigation.

Data Dictionary for canal_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50251
Data type Vector polygon
Feature count 89
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Canal Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8535
876
Updated
21 Oct 2019

This dataset was last updated on LINZ Data Service on 21 Oct 2019.

An artificial open waterway used for transportation, waterpower or irrigation.

Data Dictionary for canal_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50250
Data type Vector linestring
Feature count 368
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5124
72
Updated
19 Oct 2019

This dataset was last updated on LINZ Data Service on 19 Oct 2019.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Dyke polyline (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3785
24
Updated
17 Jun 2019

This dataset was last updated on LINZ Data Service on 17 Jun 2019.

A dyke (or dike) is an artificial embankment to contain or hold back water.

S-57 Object Class: Dyke

S-57 Acronym: DYKCON

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 53536
Data type Vector multilinestring
Feature count 110
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine farm/culture points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3794
113
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

An assemblage of cages, nets, rafts and floats or posts where fish, including shellfish, are artificially cultivated. Also called fish farm.

S-57 Object Class: Marine farm/culture

S-57 Acronym: MARCUL

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50470
Data type Vector point
Feature count 214
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Causeway polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3219
60
Updated
13 Jun 2019

This dataset was last updated on LINZ Data Service on 13 Jun 2019.

A raised way across low or wet ground or water.

S-57 Object Class: Causeway

S-57 Acronym: CAUSWY

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50543
Data type Vector multipolygon
Feature count 11
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bathymetric Surface Model Index – Third Party

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3400
21
Updated
26 Mar 2019

This dataset was last updated on LINZ Data Service on 26 Mar 2019.

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

Layer ID 95575
Data type Vector multipolygon
Feature count 67
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Magnetic variation points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5055
59
Updated
19 Dec 2018

This dataset was last updated on LINZ Data Service on 19 Dec 2018.

The angle between the magnetic and geographic (true) north at a location, expressed in degrees east or west from the direction of true north.

S-57 Object Class: Magnetic variation

S-57 Acronym: MAGVAR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50698
Data type Vector point
Feature count 40
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Administration Area (Named) polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4177
75
Updated
19 Dec 2018

This dataset was last updated on LINZ Data Service on 19 Dec 2018.

A defined (and possibly named) administrative area.

S-57 Object Class: Administration Area (Named)

S-57 Acronym: ADMARE

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50637
Data type Vector multipolygon
Feature count 21
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 36