Bream Head Data

An area in which vessels anchor or may anchor.

S-57 Object Class: Anchorage area

S-57 Acronym: ACHARE

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. A lateral buoy is used to indicate the port or starboard hand side of the route to be followed. They are generally used for well defined channels and are used in conjunction with a conventional direction of buoyage.

S-57 Object Class: Buoy, lateral

S-57 Acronym: BOYLAT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A raised way across low or wet ground or water.

S-57 Object Class: Causeway

S-57 Acronym: CAUSWY

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Raster chart image of: NZ 5214 Marsden Point

This data was compiled for the use at the following scale: 1:18000

File reference: NZ521401.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

This layer contains the DEM for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DSM is available as layer Northland - Whangarei Heads LiDAR 1m DSM (2016).

• The index tiles are available as layer Northland - Whangarei Heads LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DEM is available as layer Northland - Whangarei Heads LiDAR 1m DEM (2016).

• The index tiles are available as layer Northland - Whangarei Heads LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DEM is available as layer Northland - Whangarei Heads LiDAR 1m DEM (2016).

• The DSM is available as layer Northland - Whangarei Heads LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

A course laid out for racing

Data Dictionary for racetrack_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.