Otago Region Data - Page 12

The DUN58-NZVD2016 grid enables the conversion of normal-orthometric heights from the Dunedin 1958 local vertical datum to the New Zealand Vertical Datum 2016 (NZVD2016).

The conversion value is represented by the attribute “O”, in metres.

This conversion and NZVD2016 are formally defined in the LINZ standard LINZS25009.

DUN58-NZVD2016 is published on a two arc-minute grid (approximately 3.6 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin 1958 vertical datum (168.4° E to 171.3° E, 43.9° S to 46.5° S).

The height conversion grid models the difference between the Dunedin 1958 vertical datum and NZVD2016 using the LINZ GPS-levelling marks. From the GPS-levelling marks the expected accuracy of DUN58-NZVD2016 is better than 2 centimetres (95% Confidence interval).

More information on converting heights between vertical datums can be found on the LINZ website.

A man-made water channel, often running parallel to the contours, built specifically for the distribution of water to crops, pasture, mining activities etc

Data Dictionary for water_race_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

This layer contains the DEM for LiDAR data from the Queenstown Area of the Otago District captured in 2016.

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago - Queenstown LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.

The DBL60-NZGD2000 grid enables the conversion of normal-orthometric heights from the Dunedin-Bluff 1960 local vertical datum directly to New Zealand Geodetic Datum 2000 (NZGD2000) ellipsoidal heights.

DBL60-NZGD2000 is published on a one arc-minute grid (approximately 1.8 kilometres) extending over the benchmarks that nominally define the extent of the Dunedin-Bluff 1960 vertical datum (167.4° E to 169.9° E, 45.0° S to 46.7° S).

The conversion value is represented by the attribute “delta”, in metres.

This grid is a combination of New Zealand Quasigeoid 2016 NZGeoid2016 and the DBL60-NZVD2016 height conversion grid. Where NZGeoid2016 is the reference surface for the New Zealand Vertical Datum 2016 (NZVD2016), while the DBL60-NZVD2016 grid models the difference between the Dunedin-Bluff 1960 vertical datum and NZVD2016 using the LINZ GPS-levelling marks.

More information on converting heights between vertical datums can be found on the LINZ website.

Coastal rocks; rocks between high and low tide

Data Dictionary for rock_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

This layer contains the DEM for LiDAR data from the Otago Region captured in 2016.

• The DSM is available as layer Otago LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Refer to individual survey reports for accuracy statistics.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Otago Region captured in 2016.

• The DEM is available as layer Otago LiDAR 1m DEM (2016).

• The DSM is available as layer Otago LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Refer to individual survey reports for accuracy statistics.

Vertical datum is NZVD2016.

An excavation in the Earth for the purpose of extracting minerals.

Data Dictionary for mine_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

The meeting place to which the pilot comes out.

S-57 Object Class: Pilot boarding place

S-57 Acronym: PILBOP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A structure built to break the force of waves to protect a beach, harbour or other waterfront facility.

Data Dictionary for breakwater_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250