Tasman Region Data

Raster chart image of: NZ 6144 Abel Tasman - Port Golden Bay (Tarakohe)

This data was compiled for the use at the following scale: 10000

File reference: NZ614402.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Toitū Te Whenua Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

Raster chart image of: NZ 614 Tasman Bay / Te Tai-o-Aorere - Port Motueka

This data was compiled for the use at the following scale: 1:20000

File reference: NZ61402.tif

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT TO BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Navigational Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The online New Zealand Chart Catalogue provides more detailed and the most up to date information about New Zealand charts: New Zealand Chart Catalogue

Information on symbols and abbreviations used on nautical charts: Symbols and Abbreviations

Hydrographic standards and specifications for nautical charts and publications: Standards and Specifications

This layer contains the Index Tiles for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DEM is available as layer Tasman - Richmond and Motueka LiDAR 1m DEM (2015).

• The DSM is available as layer Tasman - Richmond and Motueka LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specfication is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DEM is available as layer Tasman - Richmond and Motueka LiDAR 1m DEM (2015).

• The index tiles are available as layer Tasman - Richmond and Motueka LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specfication is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DSM is available as layer Tasman - Richmond and Motueka LiDAR 1m DSM (2015).

• The index tiles are available as layer Tasman - Richmond and Motueka LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DEM is available as layer Tasman - Golden Bay LiDAR 1m DEM (2017).

• The DSM is available as layer Tasman - Golden Bay LiDAR 1m DSM (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DEM is available as layer Tasman - Golden Bay LiDAR 1m DEM (2017).

• The index tiles are available as layer Tasman - Golden Bay LiDAR Index Tiles (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DSM is available as layer Tasman - Golden Bay LiDAR 1m DSM (2017).

• The index tiles are available as layer Tasman - Golden Bay LiDAR Index Tiles (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data encompassing coastal areas from Onekaka in the North to Riwaka in the the South captured in 2016.

• The DEM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DEM (2016).

• The DSM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in December 2016. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data encompassing coastal areas from Onekaka in the North to Riwaka in the South captured in 2016.

• The DSM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DSM (2016).

• The index tiles are available as layer Tasman - Abel Tasman and Golden Bay LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in December 2016. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.