NZ WACA Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6334
74
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as a Wide Area Cadastral Adjustment (WACA). These adjustments are undertaken in areas where there is already substantial survey-accurate data, but there are some inconsistencies in the data resulting from small changes to geodetic control coordinates and/or the progressive submission of additional Cadastral Survey Datasets (CSDs). The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be no more than 10cm, as the WACAs target areas where coordinates already have fairly high spatial accuracy.

Layer ID 50836
Data type Vector polygon
Feature count 228
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ SPI Adjustments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5952
83
Updated
15 Feb 2020

This dataset was last updated on LINZ Data Service on 15 Feb 2020.

This layer provides the extents of the data incorporated into an adjustment which has been completed as part of the Spatial Parcel Improvement (SPI) project. The SPI project aims to improve the accuracy of digital cadastral data in areas (primarily rural) where survey-accurate data does not currently exist. The improvement of coordinates is controlled by a mathematical adjustment process using a Least Squares methodology. The adjustment/integration process results in increased mapping accuracy of surrounding spatial objects (e.g. parcels), the effect of which is some new observations or parcels appear to move. The extent of the change largely depends upon the accuracy of the underlying data. In general, movements will be at least several metres, as the SPI project targets areas where significant movements are expected.

Layer ID 50835
Data type Vector polygon
Feature count 394
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Strata Parcels

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10161
493
Updated
14 Feb 2020

This dataset was last updated on LINZ Data Service on 14 Feb 2020.

This layer provides the current strata parcel polygons and their associated descriptive data as a single layer to facilitate their use independently of other primary parcels or non primary parcels.

Strata parcels are portions of land where the vertical extent is limited.

The combination of this layer with the primary parcels layer provides all current parcels for New Zealand (i.e. excludes Historic and Pending parcels)

If you require approved or historic parcels see the All Parcels Layer

This layer has a nominal accuracy of 0.1-1m in urban areas and 1-100m in rural areas. For more detailed information about parcel accuracies please refer to the Survey Boundary Marks layer which contains accuracies for each parcel node.

The originating data for parcel/title associations includes some non-official sources where the official data does not support a link. For more information see

Layer ID 50780
Data type Vector multipolygon
Feature count 625
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Auckland South LiDAR 1m DSM (2016)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

621
15
Added
18 Dec 2019

This dataset was first added to LINZ Data Service on 18 Dec 2019.

This layer contains the DSM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

  • DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

  • Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

Layer ID 104382
Data type Grid
Resolution 1.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Buoy, installation points (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2761
47
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A buoy is a floating object moored to the bottom in a particular place, as an aid to navigation or for other specific purposes. An installation buoy is a buoy used for loading tankers with gas or oil.

S-57 Object Class: Buoy, installation

S-57 Acronym: BOYINB

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50050
Data type Vector multipoint
Feature count 1
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Beacon, isolated danger points (Hydro, 1:90k - 1:350k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4319
75
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A beacon is a prominent specially constructed object forming a conspicuous mark as a fixed aid to navigation or for use in hydrographic survey. An isolated danger beacon is a beacon erected on an isolated danger of limited extent, which has navigable water all around it.

S-57 Object Class: Beacon, isolated danger

S-57 Acronym: BCNISD

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50059
Data type Vector multipoint
Feature count 7
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lake polygon (Hydro, 1:350k - 1:1,500k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2741
151
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A large body of water entirely surrounded by land.

S-57 Object Class: Lake

S-57 Acronym: LAKARE

This data was compiled for the use in the scale range 1:350,000 to 1:1,500,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50392
Data type Vector multipolygon
Feature count 37
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Runway polygon (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4766
67
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A defined rectangular area, on a land aerodrome, prepared for the landing and take-off run of aircraft along its length. A site on which helicopters may land and take off.

S-57 Object Class: Runway

S-57 Acronym: RUNWAY

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50601
Data type Vector multipolygon
Feature count 28
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Spring points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4460
83
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A natural issue of water or other substances from the earth. One on the bottom of the sea is called a submarine spring.

S-57 Object Class: Spring

S-57 Acronym: SPRING

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50618
Data type Vector multipoint
Feature count 19
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Vegetation points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4409
74
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

Collections of, or individual plants.

S-57 Object Class: Vegetation

S-57 Acronym: VEGATN

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50627
Data type Vector multipoint
Feature count 8
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 210