Moanataiari Data

This layer contains the Index Tiles for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DEM is available as layer Waikato - Thames LiDAR 1m DEM (2017-2019).

• The DSM is available as layer Waikato - Thames LiDAR 1m DSM (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.

Sand: crushed rock, shells etc smaller than 2mm in size

Data Dictionary for sand_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-s...

This layer is a component of the Topo500 data. The Topo500 map series will, when it is created, provide updated topographic mapping for the New Zealand mainland at 1:500,000 scale.

A long heavy timber or section of steel, wood, concrete, etc.. forced into the earth which may serve as a support, as for a pier, or a free standing pole within a marine environment.

S-57 Object Class: Pile

S-57 Acronym: PILPNT

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

A fixed (not afloat) artificial structure between the water and the land, i.e. a man-made coastline.

S-57 Object Class: Shoreline construction

S-57 Acronym: SLCONS

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This layer contains the DSM for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DEM is available as layer Waikato - Thames LiDAR 1m DEM (2017-2019).

• The index tiles are available as layer Waikato - Thames LiDAR Index Tiles (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DSM is available as layer Waikato - Thames 1m LiDAR DSM (2017-2019).

• The index tiles are available as layer Waikato - Thames LiDAR 1m Index Tiles (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.