NZ Orthophotos 2000-2001

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12786
660
Updated
29 Sep 2011

This dataset was last updated on LINZ Data Service on 29 Sep 2011.

LINZ publishes 1:25,000 scale orthophotos of New Zealand from its archive. The New Zealand orthophotos shown are historical and no further orthophotos of New Zealand will be published.

Coverage of 1 pixel is 2.5m x 2.5m

Layer ID 51049
Data type Image/Raster
Resolution 2.500m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Cableway Industrial Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12690
660
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

Industrial cableway; a conveyor system built primarily for the transport of material for industry, power production etc, in which a carrier unit or units run on wire cables strung between supports.

Data Dictionary for cableway_industrial_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50248
Data type Vector linestring
Feature count 26
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Water turbulence polyline (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13186
108
Updated
04 Aug 2020

This dataset was last updated on LINZ Data Service on 04 Aug 2020.

The disturbance of water caused by the interaction of any combination of waves, currents, tidal streams, wind, shoal patches and obstructions.

S-57 Object Class: Water turbulence

S-57 Acronym: WATTUR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50759
Data type Vector multilinestring
Feature count 70
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Rapid Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12332
855
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

An area of broken, fast flowing water in a stream, where the slope of the bed increases (but without a prominent break of slope which might result in a cascade or waterfall), or where a gently dipping bar of harder rock outcrops

Data Dictionary for rapid_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50320
Data type Vector linestring
Feature count 89
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Daymark points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12921
99
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

The identifying characteristics of an aid to navigation which serve to facilitate its recognition against a daylight viewing background. On those structures that do not by themselves present an adequate viewing area to be seen at the required distance, the aid is made more visible by affixing a daymark to the structure. A daymark so affixed has a distinctive colour and shape depending on the purpose of the aid.

S-57 Object Class: Daymark

S-57 Acronym: DAYMAR

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50669
Data type Vector multipoint
Feature count 24
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Radio calling-in point points (Hydro, 1:22k - 1:90k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12841
77
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

Also called radio reporting points, they have been established in certain busy waterways and port approaches to assist traffic control. On passing these points or crossing a defined line vessels are required to report on VHF to a Traffic Control Centre.

S-57 Object Class: Radio calling-in point

S-57 Acronym: RDOCAL

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50595
Data type Vector multipoint
Feature count 14
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Crane points (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12805
100
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

A machine for lifting, shifting and lowering objects or materials by means of a swinging boom or with a lifting apparatus supported on an overhead track.

S-57 Object Class: Crane

S-57 Acronym: CRANES

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50663
Data type Vector multipoint
Feature count 10
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Pilot boarding place polygons (Hydro, 1:4k - 1:22k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12766
95
Updated
28 Jan 2020

This dataset was last updated on LINZ Data Service on 28 Jan 2020.

The meeting place to which the pilot comes out.

S-57 Object Class: Pilot boarding place

S-57 Acronym: PILBOP

This data was compiled for the use in the scale range 1:4,000 to 1:22,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

Layer ID 50712
Data type Vector multipolygon
Feature count 5
ElevationZ coordinates
Primary key fidn
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Breakwater Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11958
697
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

A structure built to break the force of waves to protect a beach, harbour or other waterfront facility.

Data Dictionary for breakwater_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50243
Data type Vector linestring
Feature count 74
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Wreck Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11815
763
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

A wrecked vessel, either submerged or visible which is attached to or foul of the bottom or cast up on the shore; or a greatly disabled or damaged vehicle

Data Dictionary for wreck_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-w...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50379
Data type Vector point
Feature count 51
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 51