Data

This layer contains the DSM for LiDAR data for Marlborough captured between 10 February 2020 and 02 July 2021.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2020-2021).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2020-2021).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between 10 February 2020 and 02 July 2021. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data for Marlborough captured between 10 February 2020 and 02 July 2021.

• The DSM is available as layer Marlborough LiDAR 1m DSM (2020-2021).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2020-2021).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between 10 February 2020 and 02 July 2021. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

The NZ Elevation Survey Index dataset provides an index to all LiDAR derived elevation datasets found on the LINZ Data Service. Each record in the dataset provides both a geometry of the extent of the elevation survey, as well as useful metadata attributes. The extents are derived from the maximum extent of DEM and DSM coverage and consist of full NZTopo50 1k tiles, even where a tile is only partially covered with data. These extents only provide a rough indication of corresponding point cloud coverage which can be quite different for some elevation surveys.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The elevation data referenced by this dataset is available on the LINZ Data Service.

This layer contains the DEM for Northland captured between December 2018 and February 2020

• The DSM is available as layer Northland LiDAR 1m DSM (2018-2020).

• The Index Tiles are available as layer Northland LiDAR Index Tiles (2018-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Northland Region by RPS between December 2018 and February 2020. These datasets were generated by RPS and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 3 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for Northland captured between December 2018 and February 2020

• The DEM is available as layer Northland LiDAR 1m DEM (2018-2020).

• The Index Tiles are available as layer Northland LiDAR Index Tiles (2018-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Northland Region by RPS between December 2018 and February 2020. These datasets were generated by RPS and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 3 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the Index TIles for LiDAR data in Northland captured between December 2018 and February 2020.

• The DEM is available as layer Northland LiDAR 1m DEM (2018-2020).

• The DSM is available as layer Northland LiDAR 1m DSM (2018-2020).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Northland Region by RSP between December 2018 and February 2020. These datasets were generated by RSP and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 3 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data for Marlborough captured between 10 February 2020 and 02 July 2021.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2020-2021).

• The DSM is available as layer Marlborough LiDAR 1m DSM (2020-2021).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between 10 February 2020 and 02 July 2021. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout.

Pulse density specification is at a minimum of 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%)
Horizontal Accuracy Specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data for Kaikōura captured in 2016.

• The index tiles are available as layer Canterbury - Kaikōura LiDAR Index Tiles (2016)

• The LAS point cloud and vendor project reports are available from OpenTopography

LiDAR was captured after the 14 November 2016 Christchurch earthquake. The dataset was generated by AAM and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 3.5 pulses/square metre.

Vertical Accuracy Specification is +/- 0.1m (95%)
Horizontal Accuracy Specification is +/- 0.5m (95%)

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data for Kaikōura captured in 2016.

• The DEM is available as layer Canterbury - Kaikōura LiDAR DEM 1m (2016)

• The LAS point cloud and vendor project reports are available from OpenTopography

LiDAR was captured after the 14 November 2016 Christchurch earthquake. The dataset was generated by AAM and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiledinto a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 3.5 pulses/square metre.

Vertical Accuracy Specification is +/- 0.1m (95%)
Horizontal Accuracy Specification is +/- 0.5m (95%)

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Wellington region captured between 2013 and 2014.
The DEM is available as layer Wellington LiDAR 1m DEM (2013-2014).
The DSM is available as layer Wellington LiDAR 1m DSM (2013-2014).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys between 2013 and 2014. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016