Elevation Data

This layer contains the DEM for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DSM is available as layer Marlborough LiDAR 1m DSM (2018).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2018).

• The index tiles are available as layer Marlborough LiDAR Index Tiles (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data in the Marlborough Region covering the Flaxbourne River, Lake Grassmere, Seddon, Lower Awatere Valley, Picton, Waikawa, the Wairau Valley and Plains, including Spring Creek, Tuamarina and parts of Blenheim in 2018.

• The DEM is available as layer Marlborough LiDAR 1m DEM (2018).

• The DSM is available as layer Marlborough LiDAR 1m DSM (2018).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Marlborough District Council by Aerial Surveys between May and September 2018. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 3.5 pulses/square metre.

Vertical accuracy specification is +/- 0.2m (95%).

Horizontal accuracy specification is +/- 1.0m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The index tiles are available as layer Manawatu - Whanganui LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from the Manawatu - Whanganui Region captured between 2015 and 2016.

• The DEM is available as layer Manawatu - Whanganui LiDAR 1m DEM (2015).

• The DSM is available as layer Manawatu - Whanganui LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

This is a reprocessed dataset of the Manawatu-Whanganui 2015 LiDAR Project. It was re-supplied by Aerial Surveys for Land Information New Zealand, and includes peripheral data not part of the original survey obtained by Horizons (Manawatu-Wanganui) Regional Council. The survey area includes Bulls, Ohura, parts of Fielding and Marton. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Canterbury Region captured between November 2016 and January 2017.

• The DSM is available as layer Canterbury LiDAR 1m DSM (2016).

• The index tiles are available as layer Canterbury LiDAR Index Tile (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM New Zealand between November 2016 and January 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density is 3.44 pulses/square metre.

Vertical accuracy specification is +/- 0.20 m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Canterbury Region captured between November 2016 and January 2017.

• The DEM is available as layer Canterbury LiDAR 1m DEM (2016).

• The index tiles are available as layer Canterbury LiDAR Index Tile (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM New Zealand between November 2016 and January 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density is 3.44 pulses/square metre.

Vertical accuracy specification is +/- 0.20 m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Canterbury Region captured between November 2016 and January 2017.

• The DEM is available as layer Canterbury LiDAR 1m DEM (2016).

• The DSM is available as layer Canterbury LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM New Zealand between November 2016 and January 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density is 3.44 pulses/square metre.

Vertical accuracy specification is +/- 0.20 m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Queenstown Area of the Otago District captured in 2016.

• The DSM is available as layer Otago - Queenstown LiDAR 1m DSM (2016).

• The index tiles are available as layer Otago - Queenstown LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Otago Regional Council by Aerial Surveys in March and April 2016. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.044m (95%).

Vertical datum is NZVD2016.