Data - Page 11

This layer contains the DEM for LiDAR data in the southern Auckland Region captured between 2016 and 2017.

• The DSM is available as layer Auckland South LiDAR 1m DSM (2016-2017).

• The index tiles are available as layer Auckland South LiDAR Index Tiles (2016-2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Auckland Council by AAM New Zealand between September 2016 to June 2017. These datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density is 4 pulses/square metre.

Vertical Accuracy Specification is +/- 0.2m (95%).

Horizontal Accuracy Specification is +/- 0.6m (95%).

Vertical datum is NZVD2016

The NZ Elevation Survey Index dataset provides an index to all LiDAR derived elevation datasets found on the LINZ Data Service. Each record in the dataset provides both a geometry of the extent of the elevation survey, as well as useful metadata attributes. The extents are derived from the maximum extent of DEM and DSM coverage and consist of full NZTopo50 1k tiles, even where a tile is only partially covered with data. These extents only provide a rough indication of corresponding point cloud coverage which can be quite different for some elevation surveys.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The elevation data referenced by this dataset is available on the LINZ Data Service.

This layer contains the Index Tiles for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DEM is available as layer Northland - Whangarei Heads LiDAR 1m DEM (2016).

• The DSM is available as layer Northland - Whangarei Heads LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DEM is available as layer Northland - Whangarei Heads LiDAR 1m DEM (2016).

• The index tiles are available as layer Northland - Whangarei Heads LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Northland Region surronding Whangarei Heads captured in 2016.

• The DSM is available as layer Northland - Whangarei Heads LiDAR 1m DSM (2016).

• The index tiles are available as layer Northland - Whangarei Heads LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Toitū Te Whenua Land Information New Zealand by Aerial Surveys in November 2016. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DEM is available as layer Waikato - Thames LiDAR 1m DEM (2017-2019).

• The DSM is available as layer Waikato - Thames LiDAR 1m DSM (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DEM is available as layer Waikato - Thames LiDAR 1m DEM (2017-2019).

• The index tiles are available as layer Waikato - Thames LiDAR Index Tiles (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data in the Waikato Region covering Thames Township captured between 2017 and 2019.

• The DSM is available as layer Waikato - Thames 1m LiDAR DSM (2017-2019).

• The index tiles are available as layer Waikato - Thames LiDAR 1m Index Tiles (2017-2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Waikato Regional Council by Aerial Surveys in February 2017, March 2018 and April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 4.23 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data in the Waikato Region covering Reporoa Township and the Upper Piako River captured in 2019.

• The DEM is available as layer Waikato - Reporoa and Upper Piako River LiDAR 1m DEM (2019).

• The DSM is available as layer Waikato - Reporoa and Upper Piako River LiDAR 1m DSM (2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Lincoln Agritech Limited by Aerial Surveys in April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data in the Waikato Region covering Reporoa Township and the Upper Piako River captured in 2019.

• The DEM is available as layer Waikato - Reporoa and Upper Piako River LiDAR 1m DEM (2019).

• The index tiles are available as layer Waikato - Reporoa and Upper Piako River LiDAR Index Tiles (2019).

• The LAS point cloud and vendor project reports are available from OpenTopography.

LiDAR was captured for Lincoln Agritech Limited by Aerial Surveys in April 2019. These datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is at a minimum of 2 pulses/square metre.

Vertical datum is NZVD2016.