Data - Page 14

This layer contains the DEM for LiDAR data from the Nelson and Tasman region captured between 2008 and 2015. The Digital Surface Model has not been included because of the varying timeframes of the base datasets. There are also small gaps between most datasets.

• The index tiles are available as layer Nelson and Tasman LiDAR Index Tiles (2008-2015).

• The LAS point clouds and vendor project reports are available from LINZ on request (imagery@linz.govt.nz).

Lidar was captured for Nelson City Council and Tasman District Council by New Zealand Aerial Mapping, Aerial Surveys and AAM New Zealand between May 2008 and December 2015. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DEM is available as layer Tasman - Richmond and Motueka LiDAR 1m DEM (2015).

• The DSM is available as layer Tasman - Richmond and Motueka LiDAR 1m DSM (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specfication is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%)

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DEM is available as layer Tasman - Richmond and Motueka LiDAR 1m DEM (2015).

• The index tiles are available as layer Tasman - Richmond and Motueka LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specfication is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%)

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data of coastal areas from Motueka in the North to Richmond in the South, including inland Wakefield captured in 2015.

• The DSM is available as layer Tasman - Richmond and Motueka LiDAR 1m DSM (2015).

• The index tiles are available as layer Tasman - Richmond and Motueka LiDAR Index Tiles (2015).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November 2015. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DEM is available as layer Tasman - Golden Bay LiDAR 1m DEM (2017).

• The DSM is available as layer Tasman - Golden Bay LiDAR 1m DSM (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data encompassing coastal areas from Onekaka in the North to Riwaka in the the South captured in 2016.

• The DEM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DEM (2016).

• The DSM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DSM (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in December 2016. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data encompassing coastal areas from Onekaka in the north to Riwaka in the south captured in 2016.

• The DEM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DEM (2017).

• The index tiles are available as layer Tasman - Abel Tasman and Golden Bay LiDAR Index Tiles (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in December 2016. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data encompassing coastal areas from Onekaka in the North to Riwaka in the South captured in 2016.

• The DSM is available as layer Tasman - Abel Tasman and Golden Bay LiDAR 1m DSM (2016).

• The index tiles are available as layer Tasman - Abel Tasman and Golden Bay LiDAR Index Tiles (2016).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in December 2016. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the Index Tiles for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DEM is available as layer Marlborough - Blenheim LiDAR 1m DEM (2014).

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from Golden Bay - Aorere Extension, Lee Dam, St Arnaud and Farewell Spit captured in 2017.

• The DEM is available as layer Tasman - Golden Bay LiDAR 1m DEM (2017).

• The index tiles are available as layer Tasman - Golden Bay LiDAR Index Tiles (2017).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Tasman District Council by AAM New Zealand in November and December 2017. The datasets were generated by AAM New Zealand and their subcontractors. Data management and distribution is by Toitū Te Whenua Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, Farewell Spit tiled into a 1:1,000 tile layout, the rest of the data tiled into a 1:2,000 tile layout

Pulse density specification is 2 pulses/square metre.

Vertical accuracy specification is +/- 0.12m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.