Oceania Data - Page 5

This layer contains the DEM for LiDAR data from Blenheim, the Wairau valley region and lower Awatere river corridor captured in 2014.

• The DSM is available as layer Marlborough - Blenheim LiDAR 1m DSM (2014).

• The index tiles are available as layer Marlborough - Blenheim LiDAR Index Tiles (2014).

• The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Marlborough District Council by New Zealand Aerial Mapping in February and May 2014. The datasets were generated by New Zealand Aerial Mapping and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:

• DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

• Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Pulse density specification is 1.4 pulses/square metre in open ground.

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Waikato west coast and Hauraki Plains captured in 2015.
The DEM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DEM (2015).
The DSM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waikato Regional Council by Aerial Surveys in February and March 2015. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Point density is 2 points/square metre.

Vertical datum is NZVD2016.

This layer contains the DSM for LiDAR data from the Waikato west coast and Hauraki Plains captured in 2015.
The DEM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DEM (2015).
The index tiles are available as layer Waikato - West Coast and Hauraki Plains LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waikato Regional Council by Aerial Surveys in February and March 2015. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Point density is 2 points/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Waikato west coast and Hauraki Plains captured in 2015.
The DSM is available as layer Waikato - West Coast and Hauraki Plains LiDAR 1m DSM (2015).
The index tiles are available as layer Waikato - West Coast and Hauraki Plains LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Waikato Regional Council by Aerial Surveys in February and March 2015. The datasets were generated by Aerial Surveys and their subcontractors. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Point density is 2 points/square metre.

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Wellington region captured in 2013. Note that this DEM is based on automated point cloud classification and contains some residual remnants of surface features.

The DSM is available as layer Wellington LiDAR 1m DSM (2013).
The index tiles are available as layer Wellington LiDAR Index Tiles (2013).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys in 2013. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data from the Wellington region captured in 2013.
The DEM is available as layer Wellington LiDAR 1m DEM (2013).
The index tiles are available as layer Wellington LiDAR Index Tiles (2013).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys in 2013. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the index tiles for LiDAR data from the Wellington region captured in 2013.
The DEM is available as layer Wellington LiDAR 1m DEM (2013).
The DSM is available as layer Wellington LiDAR 1m DSM (2013).
The LAS point cloud is available from OpenTopography.

Lidar was captured for Greater Wellington Regional Council by Aerial Surveys in 2013. The datasets were generated by Landcare Research. The survey area includes Wellington, Porirua, Lower Hutt, Upper Hutt, Wairarapa, and Kapiti. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1km x 1km tile layout

Data was collected at >1 pulse/square metre pulse density. Attributes include:
-Elevation
-Intensity values
-Return number
-Adjusted GPS time
-Classification

Vertical datum is NZVD2016

This layer contains the DSM for LiDAR data from the Christchurch and Selwyn areas captured in 2015.
The DEM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DEM (2015).
The index tiles are available as layer Canterbury - Christchurch and Selwyn LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM between 5 October and 7 November 2015. The datasets were generated by AAM and their subcontractors. The survey area includes Christchurch City and parts of the Selwyn district. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 4 pulses/square metre.

Vertical accuracy specification is +/- 0.20m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the DEM for LiDAR data from the Christchurch and Selwyn areas captured in 2015.
The DSM is available as layer Canterbury - Christchurch and Selwyn LiDAR 1m DSM (2015).
The index tiles are available as layer Canterbury - Christchurch and Selwyn LiDAR Index Tiles (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by AAM between 5 October and 7 November 2015. The datasets were generated by AAM and their subcontractors. The survey area includes Christchurch City and parts of the Selwyn district. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 4 pulses/square metre.

Vertical accuracy specification is +/- 0.20m (95%).

Horizontal accuracy specification is +/- 1.00m (95%).

Vertical datum is NZVD2016.

This layer contains the index tiles for LiDAR data from the Hawarden area captured in 2015.
The DEM is available as layer Canterbury - Hawarden LiDAR 1m DEM (2015).
The DSM is available as layer Canterbury - Hawarden LiDAR 1m DSM (2015).
The LAS point cloud and vendor project reports are available from OpenTopography.

Lidar was captured for Environment Canterbury Regional Council by Aerial Surveys on 1 April 2015, under survey name Hurunui. The datasets were generated by Aerial Surveys and their subcontractors. The survey area includes the Hawarden township area. Data management and distribution is by Land Information New Zealand.

Data comprises:
•DEM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•DSM: tif or asc tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout
•Point cloud: las tiles in NZTM2000 projection, tiled into a 1:1,000 tile layout

Planned pulse density is 1.3 pulses/square metre.

Vertical accuracy specification is per the ICSM LiDAR Acquisition Specifications and Tender Template NZ Version March 2011.

Vertical datum is NZVD2016.