Data

This dataset provides an index to the New Zealand Raster Charts available through the LINZ Data Service showing extent and Paper Chart attributes.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

The hydrographic raster data made available through the LINZ Data Service is based on the Paper Nautical Charts published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ).

The NZ Paper Nautical Chart Index contains details of six international charts which are adopted by LINZ. Due to copyright reasons LINZ is not authorised to make the chart images available for download on LDS. These charts can be purchased from chart retailers.

This document provides detailed metadata for the NZ Electronic Navigational Chart (ENC) and Paper Nautical Chart indexes available on the LINZ Data Service: data.linz.govt.nz/document/21520-enc-and-paper-cha...

This dataset provides an index to the Electronic Navigational Charts (ENC) available through the LINZ Data Service showing extent and ENC attributes.

The ENC index is compiled from the S-57 Object Class “Nautical publication information” which is used to relate additional nautical information or publications to the data. The attributes are populated by Land Information New Zealand’s (LINZ) production database.

S-57 is a standard used to exchange digital hydrographic data between hydrographic offices and to distribute this data to users.
This dataset was compiled for the use in the scale ranges 1:1,000 to 1:1,500,000 and smaller.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in ENCs, published and maintained by the New Zealand Hydrographic Authority at LINZ. Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

This document provides detailed metadata for the NZ Electronic Navigational Chart (ENC) and Paper Nautical Chart indexes available on the LINZ Data Service: data.linz.govt.nz/document/21520-enc-and-paper-cha...

This dataset provides the boundary of New Zealand’s continental shelf, which is the area of seabed around a large land mass where the sea is relatively shallow compared with the open ocean.

The continental shelf is the seabed and subsoil of the submarine areas that extend beyond the territorial sea of a coastal state throughout the natural prolongation of its land territory to the outer edge of the continental margin.

In New Zealand’s case, the continental margin extends beyond the Exclusive Economic Zone in many places and the outer limits have been established on the basis of the recommendations of the United Nations Commission on the Limits of the Continental Shelf. Under UNCLOS, New Zealand exercises sovereign rights over the continental shelf for the purpose of exploring it and exploiting its natural resources.

Note: The boundary includes, where applicable, the delimitation of the boundaries of the continental shelf with Australia under the treaty of 25 July 2004. The delimitation of the maritime boundaries in the north with Fiji, Tonga and possibly France in respect of New Caledonia, have yet to be settled by treaty.

Maritime Boundary Definitions:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

Further References:
www.linz.govt.nz/hydro/nautical-info/maritime-boun...

This index enables you to identify digital bathymetric surface models created by LINZ using third party data. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from third party single- or multi-beam data collected in the New Zealand coastal area since 2009. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be requested.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

It may take a few days to get the surface models generated from third party funded bathymetric data to you, as we need to confirm with the data owner that they are happy for their data to be released. The owner may attach conditions to the release of their data.

LINZ also holds publically funded bathymetric data for the New Zealand coastal area, which can be readily released under a Creative Commons licence for reuse. View our "NZ Bathymetric Surface Model Index" dataset to request this data.

This index enables you to identify freely available digital bathymetric surface models owned by LINZ. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from publically funded single- or multi-beam data collected in the New Zealand coastal area since early 1998. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be provided to you on request.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

LINZ has also created 3-dimensional bathymetric surface models for the New Zealand coastal area from data provided by third parties, which is subject to different licencing terms and conditions. View our "NZ Bathymetric Surface Model Index – Third Party" dataset to request this data.

This index enables you to identify freely available digital bathymetric surface models owned by LINZ. This data provides a 3-dimensional model of the surface of the seafloor.

These surface models have been created by LINZ from publically funded single- or multi-beam data collected in the Southern Ocean/Ross Sea since 2004. The polygons in the index show the extent of these gridded data models, and include descriptive information, such as the age and quality of the data.

The gridded surface models are not downloadable from the LINZ Data Service, but can be provided to you on request.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset, and formats in which the data is available.

How to order the data:
Requests for the models should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id and surf_name of the models of interest and the data format (see the options in Section 1.4 of the Bathymetric Data Dictionary).

This index enables you to identify the freely available bathymetric data held and used by LINZ on its NZ coastal nautical charts. Some of our data holdings date back to the 1930s. The polygons comprising the index show the extent of the survey datasets. The attributes attached to each polygon will enable you to view, amongst other attributes, the age and quality of the bathymetric data.

Please refer to the LINZ Bathymetric Index Data Dictionary for further information about the attributes of this dataset.

The bathymetric data is not downloadable from the LINZ Data Service. Datasets prior to the year 2000 are predominantly available only as georeferenced TIFF images of the original hard copy sounding sheets. Data post-2000 is often available as both georeferenced TIFF images and as digital data files (vector data in plain text format).

Requests for the bathymetric data should be sent to customersupport@linz.govt.nz with “Hydro Bathy Data” in the subject line. Requests must, as a minimum, specify the id, chart_no and serial_no as shown in the attributes attached to each polygon representing the datasets of interest.

LINZ also holds bathymetric data provided by third parties, which is subject to different licencing terms and conditions. View our "NZ Bathymetric Data Index – Third Party" dataset to request this data.

A dyke (or dike) is an artificial embankment to contain or hold back water.

S-57 Object Class: Dyke

S-57 Acronym: DYKCON

This data was compiled for the use in the scale range 1:22,000 to 1:90,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/

An assembly of wires or fibres, or a wire rope or chain which has been laid underwater or buried beneath the seabed.

S-57 Object Class: Cable, submarine

S-57 Acronym: CBLSUB

This data was compiled for the use in the scale range 1:90,000 to 1:350,000.

THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.

This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/