Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 13 Jan 2016.
A defined rectangular area, on a land aerodrome, prepared for the landing and take-off run of aircraft along its length. A site on which helicopters may land and take off.
S-57 Object Class: Runway
S-57 Acronym: RUNWAY
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 51594 |
---|---|
Data type | Vector point | Feature count | 1 |
Elevation | Z coordinates |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 13 Sep 2016.
A mechanical apparatus for moving bulk material or people from place to place (as by a moving belt or chain of receptacles).
S-57 Object Class: Conveyor
S-57 Acronym: CONVYR
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50662 |
---|---|
Data type | Vector multipolygon | Feature count | 1 |
Elevation | Z coordinates |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 28 Jan 2020.
The angle between the magnetic and geographic (true) north at a location, expressed in degrees east or west from the direction of true north.
S-57 Object Class: Magnetic variation
S-57 Acronym: MAGVAR
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50698 |
---|---|
Data type | Vector multipoint | Feature count | 40 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
An overhead cable is an assembly of wires or fibres, or a wire rope or chain, which is supported by structures such as poles or pylons and passing over or nearby navigable waters.
S-57 Object Class: Cable, overhead
S-57 Acronym: CBLOHD
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50658 |
---|---|
Data type | Vector multilinestring | Feature count | 48 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 31 Jul 2020.
An area in which vessels anchor or may anchor.
S-57 Object Class: Anchorage area
S-57 Acronym: ACHARE
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50635 |
---|---|
Data type | Vector multipolygon | Feature count | 71 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 Aug 2020.
A measured water depth or spot which has been reduced to a vertical datum (may be a drying height).
S-57 Object Class: Sounding
S-57 Acronym: SOUNDG
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50858 |
---|---|
Data type | Vector multipoint | Feature count | 59474 |
Elevation | Z coordinates |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 02 Aug 2020.
The solid portion of the Earth's surface, as opposed to sea, water.
S-57 Object Class: Land area
S-57 Acronym: LNDARE
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50691 |
---|---|
Data type | Vector multipolygon | Feature count | 2652 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 02 Aug 2020.
A line connecting points of equal water depth which is sometimes significantly displaced outside of soundings, symbols and other chart detail for clarity as well as generalization. Depth contours, therefore, often represent an approximate location of the line of equal depth as related to the surveyed line delineated on the source. Also referred to as depth curve.
S-57 Object Class: Depth contour
S-57 Acronym: DEPCNT
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50672 |
---|---|
Data type | Vector multilinestring | Feature count | 14377 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 03 Aug 2020.
An area of the sea where the nature of bottom is homogeneous. The nature of bottom includes the material of which it is composed and its physical characteristics. Also called character (or characteristics) of the bottom, or quality of the bottom.
S-57 Object Class: Seabed area
S-57 Acronym: SBDARE
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50733 |
---|---|
Data type | Vector multipoint | Feature count | 2254 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on LINZ Data Service on 04 Aug 2020.
The upper marking of a slope, e.g. the ridge line or the separation line between two different gradients.
S-57 Object Class: Slope topline
S-57 Acronym: SLOTOP
This data was compiled for the use in the scale range 1:4,000 to 1:22,000.
THIS DATA DOES NOT REPLACE NAUTICAL CHARTS AND MUST NOT BE USED FOR NAVIGATION.
This data is based on the S-57 data format used in Electronic Navigational Charts (ENCs) published and maintained by the New Zealand Hydrographic Authority at Land Information New Zealand (LINZ). Refer to the following link for information about S-57 data: www.linz.govt.nz/hydro/regulation/
Layer ID | 50745 |
---|---|
Data type | Vector multilinestring | Feature count | 920 |
Elevation | Z coordinates |
Primary key | fidn |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |