Data - Page 6

An isolated rock or rock formation between high and low tides.

Data Dictionary for rock_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text. It is possible that some road, railway and track names will not match those on previously generatedTopo250 Geotiffs. The names willl not be wrong, but simply not been placed using the cartographic text-placement routines normally run prior to a formal data release.
Text on versions of the gridded and gridless products generated from Oct 2014 on will match.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

An isolated rock or rock formation between high and low tides.

Data Dictionary for rock_pnt: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

A course laid out for racing

Data Dictionary for racetrack_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

For Tokelau the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• Contact local authorities for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special areas.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

-The Department of Lands & Survey, Niue, should be contacted for the latest information on tracks and huts. .

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special areas. Contact the Department of Environment, Niue, to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

This version is provided without a grid or graticule ticks.

To create this product the grid, graticule, grid text and graticule text representations were termporarily removed and the text-clashing routines rerun to reinstate features previously masked by the grid and graticule text.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• The existence of a road or track does not necessarily indicate public right of access.

• The Ministry of Infrastructure and Planning, Rarotonga, should be contacted for the latest information on tracks and huts.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in vegetation areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

-Permits may be required to visit some sensitive and special areas. Contact the Ministry of Infrastructure and Planning, Rarotonga, to see if you need to apply for a permit..