NZ Cableway People Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9575
574
Updated
17 Feb 2020

This dataset was last updated on LINZ Data Service on 17 Feb 2020.

Cableway for people; a conveyor system, built to transport people primarily, in which a carrier unit or units run on wire cables strung between supports.

Data Dictionary for cableway_people_cl: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50249
Data type Vector linestring
Feature count 94
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8653
19
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale (some of the islands at 1:25,000).

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52397
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Topo 50 Map Sheets

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8161
56
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

Polygon for each Topo50 map sheet holding extents of each sheet, it's sheet code, name, edition, and revision statement. This is the same information that is printed on each Topo50 map

Data Dictionary for linz_map_sheet: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50924
Data type Vector polygon
Feature count 1
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5138
19
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52389
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Is/Motu Ihupuku Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5236
69
Updated
11 Jun 2015

This dataset was last updated on LINZ Data Service on 11 Jun 2015.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50862
Data type Image/Raster
Resolution 4.230m
Services Web Map Service (WMS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Building Points (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8430
39
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

A relatively permanent walled and roofed construction.

Data Dictionary for building_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50925
Data type Vector point
Feature count 12
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Cliff Edges (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8283
39
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

A high, steep or overhanging face or rock. Can be rock.

Data Dictionary for cliff_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50926
Data type Vector linestring
Feature count 95
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7064
110
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50927
Data type Vector linestring
Feature count 359
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Descriptive Texts (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8089
40
Updated
11 Nov 2013

This dataset was last updated on LINZ Data Service on 11 Nov 2013.

Descriptive text; object used to hold text.

Data Dictionary for descriptive_text: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50928
Data type Vector point
Feature count 5
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Campbell Island/Motu Ihupuku Geographic Names (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8282
52
Updated
10 Jun 2015

This dataset was last updated on LINZ Data Service on 10 Jun 2015.

Geographic name holds the proper noun of certain objects within the Topo databases. Geographic_name does not apply to roads, railway lines, or descriptive text - eg 'Brunner Mine' would be a Geographic_name but 'mine disused' is held in the descriptive_text feature

Data Dictionary for geographic_name: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore Islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50929
Data type Vector point
Feature count 95
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 171 to 180 of 556