NZ Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

181358
35839
Updated
04 Aug 2020

This dataset was last updated on LINZ Data Service on 04 Aug 2020.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50767
Data type Image/Raster
Resolution 4.233m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6
135572
44304
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50768
Data type Vector linestring
Feature count 484179
Elevation Z (elevation)
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 8m Digital Elevation Model (2012)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

103401
31030
Updated
18 Aug 2016

This dataset was last updated on LINZ Data Service on 18 Aug 2016.

Suitable for cartographic visualisation only. It was created by the interpolation of 20m contours with post-processing and filtering it is not suitable for terrain analysis.

This 8m Digital Elevation Model (DEM) was originally created by Geographx (geographx.co.nz) and was primarily derived from January 2012 LINZ Topo50 20m contours (data.linz.govt.nz/layer/768).

For a full description of the how the DEM was generated refer to this layer’s metadata.

Layer ID 51768
Data type Grid
Resolution 8.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Aerial Photo Footprints, Mainland NZ, (1936-2005) polygons

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

53028
2192
Updated
15 Jan 2020

This dataset was last updated on LINZ Data Service on 15 Jan 2020.

Note: This layer has been provided to enable potential users to identify the coverage of photography for Mainland NZ flown on behalf of the Crown between 1936 and 2005.
The layer shows the extent of each photograph taken. The NZ Aerial Survey Footprints, Mainland NZ, (1936-2005) polygons layer shows the extent of each survey undertaken, and the Digitised Historic Aerial Surveys Available for Download (1936-2005) layer shows the extents of the surveys digitised and released by LINZ under open license. See www.linz.govt.nz/about-linz/what-were-doing/projec... for direction on how to access the digitised photos.

The photos are not downloadable from the LINZ Data Service.

The Crown Aerial Film Negative Collection is managed for LINZ by Opus International.You can are order images from the Collection from Opus International in a number of formats, including:
- contact prints
- enlargements
- digital files
- precision scans for photogrammetric production
- orthophotos
You will need to tell Opus International the survey, run and photo number (values in the ‘SURVEY’ 'RUN' and 'PHOTO_NO' attributes) covering your area of interest.
Opus International will be able to provide information about the cost of providing images in the various formats. Contact them at: photosales@opus.co.nz or 0800 680 690

There are also a large number of images which previously belonged to New Zealand Aerial Mapping and which are now are available for public use. The extents of these may be added to the LDS in future. You can order these images by contacting Opus International.

Layer ID 51002
Data type Vector polygon
Feature count 529940 (incl. 98056 with empty or null geometries)
Primary key sufi
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo250 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

40044
6317
Updated
08 May 2018

This dataset was last updated on LINZ Data Service on 08 May 2018.

The Topo250 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands at 1:250,000 scale.

Along with the paper-based Topo250 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo250/digi...

Layer ID 50798
Data type Image/Raster
Resolution 21.200m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Coastlines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

37405
9202
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

The line forming the boundary between the land and sea, defined by mean high water.

Data Dictionary for coastline: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50258
Data type Vector linestring
Feature count 38
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZMS 260 Map Sheets

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

43636
1279
Updated
22 Apr 2013

This dataset was last updated on LINZ Data Service on 22 Apr 2013.

This layer shows the New Zealand mainland sheet extents for the historic NZMS 260 map series.

The NZMS 260 Topographic map series began in 1977 and ended production in 2009. The series was produced at the 1:50,000 scale.

NOTE: The NZMS260 map series has now been superseded by NZTopo50. To download the NZTopo50 Map sheets please refer to NZ Topo50 Map Sheets. For further information and latest editions of Topographic maps for the whole of New Zealand see here.

Layer ID 51579
Data type Vector multipolygon
Feature count 294
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Road Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31062
12803
Updated
03 Aug 2020

This dataset was last updated on LINZ Data Service on 03 Aug 2020.

Any formed all weather route suitable for the passage of any vehicle.

Data Dictionary for road_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50329
Data type Vector linestring
Feature count 135454
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Building Outlines

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

29465
7989
Updated
24 Aug 2020

This dataset was last updated on LINZ Data Service on 24 Aug 2020.

This dataset provides current outlines of buildings within mainland New Zealand captured from the latest aerial imagery.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset shows the most recent set of building outlines extracted from the LINZ aerial imagery available on the LINZ Data Service.

Current coverage includes areas in Northland, Auckland, Waikato, Gisborne, Bay of Plenty, Hawke’s Bay, Taranaki, Manawatu-Whanganui, Wellington, Tasman, Nelson, West Coast, Marlborough, Canterbury, Southland, and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Since aerial imagery is flown only every few years in each region of the country, building outlines only reflect those buildings observed at the date of this aerial imagery capture, and may not reflect buildings constructed after this time period.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines (All Sources) - contains all combinations of building outlines from multiple years of imagery that have existed since the beginning of this dataset, and the dates when each building outline existed in the associated aerial imagery.

NZ Building Outlines Lifecycle - is related to the dataset above and stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline.


APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API

Layer ID 101290
Data type Vector multipolygon
Feature count 3258578
Primary key building_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31473
4283
Updated
04 Aug 2020

This dataset was last updated on LINZ Data Service on 04 Aug 2020.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 396