Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 01 Dec 2014.
A ridge, usually of rocks or coral, lying near the surface of the sea, which may be visible at low tide, but is usually covered with water
Data Dictionary for reef_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52155 |
---|---|
Data type | Vector polygon | Feature count | 6 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 01 Dec 2014.
A sheet of salt water separated from the open sea by sand, shingle banks or a road embankment. The sheet of water between an offshore reef, esp. of coral, and mainland. The sheet of water within a ring or horseshoe shaped atoll.
Data Dictionary for lagoon_poly: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52150 |
---|---|
Data type | Vector polygon | Feature count | 1 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 02 Dec 2014.
A structure used for the storage of fluids
Data Dictionary for tank_pnt: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52279 |
---|---|
Data type | Vector point | Feature count | 13 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 04 Dec 2014.
Any structure on a waterfront, designed to make it possible for vessels to lie alongside and take or unload cargo, passengers etc.
Data Dictionary for wharf_edge: apps.linz.govt.nz/topo-data-dictionary/index.aspx?...
This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for New Zealand and it's offshore dependancies, at 1:50,000.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52166 |
---|---|
Data type | Vector linestring | Feature count | 3 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52405 |
---|---|
Data type | Image/Raster |
Resolution | 10.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52404 |
---|---|
Data type | Image/Raster |
Resolution | 10.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52403 |
---|---|
Data type | Image/Raster |
Resolution | 10.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52402 |
---|---|
Data type | Image/Raster |
Resolution | 5.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52401 |
---|---|
Data type | Image/Raster |
Resolution | 5.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to LINZ Data Service on 10 Jun 2015.
In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.
Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.
The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.
Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50
Layer ID | 52400 |
---|---|
Data type | Image/Raster |
Resolution | 5.000m |
Services | Catalog Service (CS-W), data.govt.nz Atom Feed |