Tagged: New Zealand in World

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Suitable for cartographic visualisation only. It was created by the interpolation of 20m contours with post-processing and filtering it is not suitable for terrain analysis.

This 8m Digital Elevation Model (DEM) was originally created by Geographx (geographx.co.nz) and was primarily derived from January 2012 LINZ Topo50 20m contours (data.linz.govt.nz/layer/768).

For a full description of the how the DEM was generated refer to this layer’s metadata.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

• Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

• The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

• Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

• Contours and spot elevations in forest and snow areas may be less accurate.

• Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

• Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

A natural, flowing body of water emptying into an ocean, lake or other body of water and usually fed along it's course by converging tributaries.

Data Dictionary for river_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Any formed all weather route suitable for the passage of any vehicle.

Data Dictionary for road_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A cable or cables supported by poles or towers for the transmission of electricity

Data Dictionary for powerline_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-p...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

A natural, flowing body of water emptying into an ocean, lake or other body of water and usually fed along it's course by converging tributaries.

Data Dictionary for river_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Any standing body of fresh inland water.

Data Dictionary for lake_poly: docs.topo.linz.govt.nz/data-dictionary/tdd-class-l...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

The line forming the boundary between the land and sea, defined by mean high water.

Data Dictionary for coastline: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

• NZ Coastlines (Topo 1:50k)
• NZ Island Polygons (Topo 1:50k)
• NZ Auckland Is Island Polygons (Topo, 1:50k)
• NZ Campbell Is / Motu Ihupuku Island Polygons (Topo, 1:50k)
• NZ Antipodes Is Island Polygons (Topo, 1:25k)
• NZ Kermadec Is Island Polygons (Topo, 1:25k)
• NZ Bounty Is Island Polygons (Topo, 1:25k)
• NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k)
• NZ Chatham Is island polygons (Topo, 1:50k)

This topographic coastline is the line forming the boundary between the land and sea, defined by mean high water.

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.

For more detailed description of each layer refer to the layer urls above.

APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API