NZ Imagery Survey Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

13401
330
Updated
19 Oct 2020

This dataset was last updated on LINZ Data Service on 19 Oct 2020.

The NZ Imagery Survey Index dataset provides an index to all orthophoto index tiles found on the LINZ Data Service. Each record in the dataset provides both a geometry of the maximum extent of the orthophoto index, as well as all attributes found in each index tile. This dataset therefore provides information to assess orthophoto coverage and metadata across the entire country.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The imagery data referenced by this dataset is available on the LINZ Data Service.

Layer ID 95677
Data type Vector multipolygon
Feature count 121
Primary key imagery_survey_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Historic Aerial Photos, Survey Footprints, NZAM (1939-2008)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

18027
236
Added
20 Dec 2017

This dataset was first added to LINZ Data Service on 20 Dec 2017.

When New Zealand Aerial Mapping (NZAM) went into liquidation in September 2014, LINZ took ownership of their historical photo archive and added it to the Crown Aerial Film Archive, making its photos available to the public.

This layer has been provided to enable potential users to identify the coverage of aerial photography for Mainland NZ flown by NZAM for private contract work between 1939 and 2008. These surveys compliment the Crown photos identified in Historic Aerial Photos, Survey Footprints, CROWN (1936-2005).

If you are aware of any inaccuracies, please contact LINZ at topography@linz.govt.nz. The layer shows the approximate bounding box of each aerial survey undertaken.

The physical Crown Aerial Film Archive is managed for LINZ by WSP New Zealand. Most Crown photographs have been scanned and are available digitally from LINZ upon request. See the Crown Aerial Film Archive historical imagery scanning project for direction on how to access the digitised photos. The photos are not downloadable from the LINZ Data Service.

There are a small number of images held in the Archive that have not been referenced in the LDS layers due to incomplete metadata. WSP NZ will be able to let you know if additional photographs are available in your area of interest.

Layer ID 92237
Data type Vector multipolygon
Feature count 4347
Primary key id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Bridge Centrelines (Topo, 1:250k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5493
172
Updated
24 Nov 2020

This dataset was last updated on LINZ Data Service on 24 Nov 2020.

A structure erected over a depression or obstacle to carry traffic or some facility such as a pipeline.

Data Dictionary for bridge_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-b...

This layer is a component of the Topo250 map series. The Topo250 map series provides topographic mapping for the New Zealand mainland and Chatham Islands, at 1:250,000 scale.

Further information on Topo250: www.linz.govt.nz/topography/topo-maps/topo250

Layer ID 53363
Data type Vector linestring
Feature count 1
Primary key t250_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Antarctic Ant50k Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9825
43
Updated
02 Jul 2015

This dataset was last updated on LINZ Data Service on 02 Jul 2015.

The Ant50 map series provides topographic mapping within the Ross Dependency, Antarctica

Digital images of the maps are also publicly available from www.linz.govt.nz/topography/topo-maps/antarctic-to...

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Layer ID 52407
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Kermadec Is Topo25 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9415
19
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 (some of the islands at 1:25,000) scale.

The Kermadec Islands data and maps, although captured and presented at 1:25,000 scale are, to all intents and purposes, part of the Topo50 series.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • The existence of a road or track does not necessarily indicate public right of access.

  • Closed tracks are defined as being no longer maintained or passable and should not be used by recreationalists. The Department of Conservation or other authorities should be contacted for the latest information on tracks and huts.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52406
Data type Image/Raster
Resolution 2.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:50k, Zone4)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9178
18
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52405
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:50k, Zone3)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7765
36
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52404
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Niue Terrain Relief (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7612
34
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52403
Data type Image/Raster
Resolution 10.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:25k, Zone4)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9334
24
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52402
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

Cook Islands Terrain Relief (Topo, 1:25k, Zone3)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7371
13
Added
10 Jun 2015

This dataset was first added to LINZ Data Service on 10 Jun 2015.

In addition to contour lines, relief shading helps visualise the terrain. Hills and valleys are shaded as if they were illuminated from the north-west.

Relief layers were generated for each sheet, and specifically for use in the Topo50 map series. There may be subtle differences in the relief shading of adjacent map sheets. Where no contour information exists, relief shading has not been produced.

The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham Islands, offshore islands, and offshore dependancies at 1:50,000 (some of the islands at 1:25,000) scale.
For some small islands the printed map scale is 1:25,000. Although presented at 1:25,000 this layer, for all intents and purposes, forms part of the Topo50 map series.

Further information on Topo50: www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 52401
Data type Image/Raster
Resolution 5.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 716