NZ Contours (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6
140720
46740
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

An imaginary line that connects points of equal height value eg the elevation of the land surface above or below a vertical datum, in this case of LINZ topographic mapping, this is Mean Sea Level.

Data Dictionary for contour: docs.topo.linz.govt.nz/data-dictionary/tdd-class-c...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50768
Data type Vector linestring
Feature count 484179
Elevation Z (elevation)
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 8m Digital Elevation Model (2012)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

114030
33110
Updated
18 Aug 2016

This dataset was last updated on LINZ Data Service on 18 Aug 2016.

Suitable for cartographic visualisation only. It was created by the interpolation of 20m contours with post-processing and filtering it is not suitable for terrain analysis.

This 8m Digital Elevation Model (DEM) was originally created by Geographx (geographx.co.nz) and was primarily derived from January 2012 LINZ Topo50 20m contours (data.linz.govt.nz/layer/768).

For a full description of the how the DEM was generated refer to this layer’s metadata.

Layer ID 51768
Data type Grid
Resolution 8.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

197950
37746
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 50767
Data type Image/Raster
Resolution 4.233m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Building Outlines

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

29542
11137
Updated
24 Aug 2020

This dataset was last updated on LINZ Data Service on 24 Aug 2020.

This dataset provides current outlines of buildings within mainland New Zealand captured from the latest aerial imagery.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset shows the most recent set of building outlines extracted from the LINZ aerial imagery available on the LINZ Data Service.

Current coverage includes areas in Northland, Auckland, Waikato, Gisborne, Bay of Plenty, Hawke’s Bay, Taranaki, Manawatu-Whanganui, Wellington, Tasman, Nelson, West Coast, Marlborough, Canterbury, Southland, and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Since aerial imagery is flown only every few years in each region of the country, building outlines only reflect those buildings observed at the date of this aerial imagery capture, and may not reflect buildings constructed after this time period.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines (All Sources) - contains all combinations of building outlines from multiple years of imagery that have existed since the beginning of this dataset, and the dates when each building outline existed in the associated aerial imagery.

NZ Building Outlines Lifecycle - is related to the dataset above and stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline.


APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API

Layer ID 101290
Data type Vector multipolygon
Feature count 3258578
Primary key building_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ River Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

43898
15025
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

A natural, flowing body of water emptying into an ocean, lake or other body of water and usually fed along it's course by converging tributaries.

Data Dictionary for river_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50327
Data type Vector linestring
Feature count 712839
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Topo50 Gridless Maps

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

33892
4643
Updated
20 Feb 2021

This dataset was last updated on LINZ Data Service on 20 Feb 2021.

The Topo50 map series provides topographic mapping for the New Zealand mainland, the Chatham Islands, and offshore islands at 1:50,000 scale.

Along with the paper-based Topo50 map series, digital images of the maps are also publicly available.

Georeferenced raster digital images are provided at a resolution of 300 DPI. Georeferencing allows adjacent maps to be accurately and automatically aligned within GIS systems.

For more information, and a description of the georeferencing keys:
www.linz.govt.nz/topography/topo-maps/topo50/digit...

Please be aware of the following:

  • Representation of a road or track does not necessarily indicate public right of access. For access rights, maps and other information, contact the New Zealand Walking Access Commission - www.walkingaccess.govt.nz

  • The Department of Conservation and other agencies should be contacted for the latest information on tracks and back country huts. Closed tracks are defined as being no longer maintained or passable and should not be used.

  • Not all aerial wires, cableways and obstructions that could be hazardous to aircraft are held in the data.

  • Contours and spot elevations in forest and snow areas may be less accurate.

  • Not all pipelines including both underground and above ground are held in the data or shown on the printed maps. For the latest information please contact the utility and infrastructure agencies

  • Permits may be required to visit some sensitive and special islands and areas. Contact the Department of Conservation to see if you need to apply for a permit.

Layer ID 52343
Data type Image/Raster
Resolution 4.000m
Services Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Road Centrelines (Topo, 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31706
13937
Updated
19 Feb 2021

This dataset was last updated on LINZ Data Service on 19 Feb 2021.

Any formed all weather route suitable for the passage of any vehicle.

Data Dictionary for road_cl: docs.topo.linz.govt.nz/data-dictionary/tdd-class-r...

This layer is a component of the Topo50 map series. The Topo50 map series provides topographic mapping for the New Zealand mainland, Chatham and New Zealand's offshore islands, at 1:50,000 scale.

Further information on Topo50:
www.linz.govt.nz/topography/topo-maps/topo50

Layer ID 50329
Data type Vector linestring
Feature count 138874
Primary key t50_fid
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Building Outlines (All Sources)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8750
1997
Updated
24 Aug 2020

This dataset was last updated on LINZ Data Service on 24 Aug 2020.

This dataset provides building outlines within mainland New Zealand extracted from multiple years of aerial imagery, allowing you to see change over time, or restrict the dataset to building outlines that match a specific aerial imagery source.

A building outline is a 2D representation of the roof outline of a building which has been classified from LINZ aerial imagery using a combination of automated and manual processes to extract and refine a building roof outline.

Building roof outlines observed in aerial imagery larger than or equal to 10 square meters are captured in this dataset, and may include structures such as garages and large sheds.

Data vintage

This dataset contains all building outlines which have been extracted from multiple years of aerial imagery available in each region of the country, including the most recent imagery. This dataset includes the dates for which each building existed in the aerial imagery.

Coverage areas include Northland, Auckland, Waikato, Bay of Plenty, Gisborne, Hawke’s Bay, Taranaki, Manawatu-Whanganui, Wellington, Tasman, Nelson, West Coast, Marlborough, Canterbury, Southland and Otago. This dataset will be updated and expanded as new aerial imagery becomes available.

Please refer to the NZ Building Outlines Data Dictionary for detailed metadata and information about this dataset.

Related building outlines data

NZ Building Outlines Lifecycle – stores the relationship between building outlines when one building is split into two or more building outlines, or when multiple building outlines are merged into a single outline. Use this in conjunction with the NZ Building Outlines (All Sources) dataset.

NZ Building Outlines - provides current building outlines only, derived from the latest LINZ aerial imagery.

Layer ID 101292
Data type Vector multipolygon
Feature count 3454426
Primary key building_outline_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Coastlines and Islands Polygons (Topo 1:50k)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

21374
6093
Updated
22 Feb 2021

This dataset was last updated on LINZ Data Service on 22 Feb 2021.

This provides a polygon coastline and islands layer which is based on the Topo50 products. It is a combination of the following layers:

This topographic coastline is the line forming the boundary between the land and sea, defined by mean high water.

Islands from the NZ Island Polygons layer that lie within the NZ Coastline and Chatham Islands areas (i.e. islands in lakes, rivers and estuaries) have been removed.

The GIS workflow to create the layer is:

  1. NZ Coastlines were converted from a polyline to a polygon using a polyline to polygon tool.
  2. The resulting coastal polygon was then used as an input into an erase tool and run against the NZ Island Polygon layer to remove all islands lying within the NZ Mainland and Stewart Island.
  3. This was then merged with the NZ Chatham Is island polygons (Topo, 1:50k) that have had the islands within the main island polygon removed, NZ Auckland Is Island Polygons (Topo, 1:50k), NZ Campbell Is / Motu Ihupuku Island, NZ Antipodes Is Island Polygons (Topo, 1:25k), NZ Kermadec Is Island Polygons (Topo, 1:25k), NZ Bounty Is Island Polygons (Topo, 1:25k) and NZ Snares Is / Tini Heke Island Polygons (Topo, 1:25k) layers using a merge tool.
  4. Lake Onoke from the NZ Lake Polygons (Topo 1:50k) layer and Te Whanga Lagoon from the NZ Chatham Is lagoon polygons (Topo, 1:50k) layer were then erased from the resultant polygon layer to include these two water bodies in the coastline definition.

For more detailed description of each layer refer to the layer urls above.


APIs and web services
This dataset is available via ArcGIS Online and ArcGIS REST services, as well as our standard APIs.
LDS APIs and OGC web services
ArcGIS Online map services
ArcGIS REST API

Layer ID 51153
Data type Vector multipolygon
Feature count 9132
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Aerial Photo Footprints, Mainland NZ, (1936-2005) polygons

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

53090
2479
Updated
07 Dec 2020

This dataset was last updated on LINZ Data Service on 07 Dec 2020.

Note: This layer has been provided to enable potential users to identify the coverage of photography for Mainland NZ flown on behalf of the Crown between 1936 and 2005.

This layer shows the extent of each photograph taken. The NZ Aerial Survey Footprints, Mainland NZ, (1936-2005) polygons layer shows the extent of each survey undertaken.

The physical Crown Aerial Film Archive is managed for LINZ by WSP New Zealand. Most Crown photographs have been scanned and are available digitally from LINZ upon request. See the Crown Aerial Film Archive historical imagery scanning project for direction on how to access the digitised photos. The photos are not downloadable from the LINZ Data Service.

Photos not yet digitised by be ordered from WSP NZ. You will need to provide the survey, run, and photo number (values in the ‘SURVEY’, 'RUN', and 'PHOTO_NO' attributes) covering your area of interest. WSP NZ will be able to provide information about the cost of providing images in various formats. Contact them at WSP Photo Sales.

The New Zealand Aerial Mapping photo archive has been aquired and added to the Crown Aerial Film Archive. These images will also become available from LINZ once digitised or may be ordered from WSP NZ. Historic Aerial Photos, Survey Footprints, NZAM (1939-2008) shows the extent of each survey undertaken.

Layer ID 51002
Data type Vector polygon
Feature count 549714 (incl. 117830 with empty or null geometries)
Primary key sufi
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 714